From: "Suzuki K. Poulose" <suzuki.poulose@xxxxxxx> This series enables the PMU monitoring support for CCI400 on ARM64. The existing CCI400 driver code is a mix of PMU driver and the MCPM driver code. The MCPM driver is only used on ARM(32) and contains arm32 assembly and hence can't be built on ARM64. This patch splits the code to - ARM_CCI400_PORT_CTRL driver - depends on ARM && V7 - ARM_CCI400_PMU driver Accessing the Peripheral ID2 register(PID2) on CCI-400, to detect the revision of the chipset, is a secure operation. Hence, it prevents us from running this on non-secure platforms. The issue is overcome by explicitly mentioning the revision number of the CCI PMU in the device tree binding. The device-tree binding has been updated with the new bindings. i.e, arm-cci-400-pmu,r0 => revision 0 arm-cci-400-pmu,r1 => revision 1 arm-cci-400-pmu => (old) DEPRECATED The old binding has been DEPRECATED and must be used only on ARM32 system with secure access. We don't have a reliable dynamic way to detect if the system is running secure. This series tries to use the best safe method by relying on the availability of MCPM(as it was prior to the series). It is upto the MCPM platform driver to decide, if the system is secure before it goes ahead and registers its drivers and pokes the CCI. This series doesn't address/solve the problem of MCPM. I will be happy to use a better approach, if there is any. Tested on (non-secure)TC2 and Juno. Change since V1 (Suggestions from Nicolas Pitre): - Split Patch 2 to separate the 'PMU' abstraction(now Patch 2/5) from the introduction of a new device-tree binding(now Patch 3/5) - Rename ARM_CCI400_MCPM => ARM_CCI400_PORT_CTRL CCI400_MCPM_PORTS_DATA => CCI400_PORTS_DATA - Select ARM_CCI400_COMMON for ARM_CCI400_PORT_CTRL - Better documentation in the git commit log about the ARM_CCI config. - Move the 'pr_info' to its apporpriate patch. Suzuki K. Poulose (5): arm-cci: Rearrange code for splitting PMU vs driver code arm-cci: Abstract the CCI400 PMU speicific definitions arm-cci: Get rid of secure transactions for PMU driver arm-cci: Split the code for PMU vs driver support arm-cci: Fix CCI PMU event validation Documentation/devicetree/bindings/arm/cci.txt | 7 +- arch/arm/include/asm/arm-cci.h | 42 +++ arch/arm/mach-exynos/Kconfig | 2 +- arch/arm/mach-vexpress/Kconfig | 4 +- arch/arm64/include/asm/arm-cci.h | 27 ++ drivers/bus/Kconfig | 27 +- drivers/bus/arm-cci.c | 483 ++++++++++++++----------- include/linux/arm-cci.h | 9 +- 8 files changed, 383 insertions(+), 218 deletions(-) create mode 100644 arch/arm/include/asm/arm-cci.h create mode 100644 arch/arm64/include/asm/arm-cci.h -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
