Remove SDHCI compatible for CV1800b from common dtsi file to put it in the specific dtsi file of the CV1800b. This commits aims at following the same guidelines as in the other nodes of the CV18XX family. Signed-off-by: Thomas Bonnefille <thomas.bonnefille@xxxxxxxxxxx> --- arch/riscv/boot/dts/sophgo/cv1800b.dtsi | 4 ++++ arch/riscv/boot/dts/sophgo/cv18xx.dtsi | 1 - 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi index ec9530972ae2..b9cd51457b4c 100644 --- a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi +++ b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi @@ -25,3 +25,7 @@ &clint { &clk { compatible = "sophgo,cv1800-clk"; }; + +&sdhci0 { + compatible = "sophgo,cv1800b-dwcmshc"; +}; diff --git a/arch/riscv/boot/dts/sophgo/cv18xx.dtsi b/arch/riscv/boot/dts/sophgo/cv18xx.dtsi index 891932ae470f..7247c7c3013c 100644 --- a/arch/riscv/boot/dts/sophgo/cv18xx.dtsi +++ b/arch/riscv/boot/dts/sophgo/cv18xx.dtsi @@ -288,7 +288,6 @@ uart4: serial@41c0000 { }; sdhci0: mmc@4310000 { - compatible = "sophgo,cv1800b-dwcmshc"; reg = <0x4310000 0x1000>; interrupts = <36 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk CLK_AXI4_SD0>, -- 2.45.2