Add secure qfprom node and also add properties for multi channel DDR. This is required for LLCC driver to pick the correct LLCC configuration. Signed-off-by: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx> --- Changes in v2: * Minor correction in commit message * Link to v1: https://lore.kernel.org/linux-arm-msm/20240607113445.2909-1-quic_kbajaj@xxxxxxxxxxx/ --- arch/arm64/boot/dts/qcom/qdu1000.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi index 7a77f7a55498..d8df1bab63d5 100644 --- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi @@ -1584,6 +1584,21 @@ system-cache-controller@19200000 { reg-names = "llcc0_base", "llcc_broadcast_base"; interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + + nvmem-cell-names = "multi-chan-ddr"; + nvmem-cells = <&multi_chan_ddr>; + }; + + sec_qfprom: efuse@221c8000 { + compatible = "qcom,qdu1000-sec-qfprom", "qcom,sec-qfprom"; + reg = <0 0x221c8000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + multi_chan_ddr: multi-chan-ddr@12b { + reg = <0x12b 0x1>; + bits = <0 2>; + }; }; }; -- 2.42.0
