Hello Dragan,
Thank you so much for your reply!
Best regards,
--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.
On 6/11/24 22:45, Dragan Simic wrote:
On 2024-06-11 15:37, Dragan Simic wrote:
Hello Fukami,
On 2024-06-11 14:27, FUKAUMI Naoki wrote:
to make "poweroff" command work, add "system-power-controller;" into
pmic@0. without this, "poweroff" works as same as "reboot".
Sorry, I forgot to add that the description above could be reworded
a bit, e.g. not to repeat what's already visible in the patch itself.
For example:
Designate the RK806 PMIC on the Radxa ROCK 5A as the system power
controller, so the board shuts down properly on poweroff(8).
The patch subject could also be tweaked a bit, e.g. to refer to the
board as "Radxa ROCK 5A".
Fixes: 75fdcbc8f4c1 ("arm64: dts: rockchip: add PMIC to rock-5a")
Signed-off-by: FUKAUMI Naoki <naoki@xxxxxxxxx>
Looking good to me, with a small remark below.
Reviewed-by: Dragan Simic <dsimic@xxxxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
index b070955627be..cf7b878a3eb2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
@@ -395,6 +395,8 @@ pmic@0 {
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
spi-max-frequency = <1000000>;
I don't think there's need for the empty line right above, i.e.
between the "spi-max-frequency" and "system-power-controller" lines.
+ system-power-controller;
+
vcc1-supply = <&vcc5v0_sys>;
vcc2-supply = <&vcc5v0_sys>;
vcc3-supply = <&vcc5v0_sys>;
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
