For devices in the RZ/G2L family, we have so far relied on U-Boot correctly configuring the Ethernet interfaces in RGMII mode with PVDD=1.8V before the kernel is booted. Instead, the required configuration should be described in the device tree and activated within the pinctrl driver. Changes v1-v2: * Rebased on next-20240611. * Changed the approach taken in the pinctrl patches to be compatible with changes made by Prabhakar for RZ/V2H support. I haven't picked up Reviewed-by tags on these patches as they've changed a lot. * Clarified that patch 6/9 also affects RZ/Five. * No major changes to the dts patches so I've picked up Geert's Reviewed-by tags for these. Paul Barker (9): pinctrl: renesas: rzg2l: Clarify OEN read/write support pinctrl: renesas: rzg2l: Clean up and refactor OEN read/write functions pinctrl: renesas: rzg2l: Support output enable on RZ/G2L arm64: dts: renesas: rzg2l: Enable Ethernet TXC output arm64: dts: renesas: rzg2lc: Enable Ethernet TXC output arm64: dts: renesas: rzg2ul: Enable Ethernet TXC output arm64: dts: renesas: rzg2l: Set Ethernet PVDD to 1.8V arm64: dts: renesas: rzg2lc: Set Ethernet PVDD to 1.8V arm64: dts: renesas: rzg2ul: Set Ethernet PVDD to 1.8V .../boot/dts/renesas/rzg2l-smarc-som.dtsi | 86 ++++++---- .../boot/dts/renesas/rzg2lc-smarc-som.dtsi | 43 +++-- .../boot/dts/renesas/rzg2ul-smarc-som.dtsi | 86 ++++++---- drivers/pinctrl/renesas/pinctrl-rzg2l.c | 150 ++++++++++++------ 4 files changed, 235 insertions(+), 130 deletions(-) -- 2.39.2