On Tue, 11 Jun 2024 09:23:23 +0530, Kanak Shilledar wrote: > Convert the Broadcom BCM63138 Processor Monitor Bus to newer DT > schema. Created DT schema based on the .txt file which had `compatible`, > `reg` and `"#reset-cells" as required properties. > Added one line description which was missing in the original .txt file. > Added Philipp Zabel as the maintainer (took from MAINTAINERS file). > > Signed-off-by: Kanak Shilledar <kanakshilledar@xxxxxxxxx> > --- > .../bindings/reset/brcm,bcm63138-pmb.txt | 19 -------- > .../bindings/reset/brcm,bcm63138-pmb.yaml | 43 +++++++++++++++++++ > 2 files changed, 43 insertions(+), 19 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/reset/brcm,bcm63138-pmb.txt > create mode 100644 Documentation/devicetree/bindings/reset/brcm,bcm63138-pmb.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/reset/brcm,bcm63138-pmb.example.dtb: reset-controller@4800c0: '#power-domain-cells' is a required property from schema $id: http://devicetree.org/schemas/power/brcm,bcm-pmb.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/reset/brcm,bcm63138-pmb.example.dtb: reset-controller@4800c0: '#reset-cells' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/power/brcm,bcm-pmb.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240611035329.33648-2-kanakshilledar@xxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
