On Mon, Jun 10, 2024 at 11:07:15AM +0200, Martin Schiller wrote: > On 2024-06-10 10:55, Krzysztof Kozlowski wrote: > > On 06/06/2024 10:52, Martin Schiller wrote: > > > From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> > > > > > > The CPU port has to specify a phy-mode and either a phy or a > > > fixed-link. > > > Since GSWIP is connected using a SoC internal protocol there's no PHY > > > involved. Add phy-mode = "internal" and a fixed-link to describe the > > > communication between the PMAC (Ethernet controller) and GSWIP switch. > > > > You did nothing in the binding to describe them. You only extended > > example, which does not really matter if there is DTS with it. > > > > Best regards, > > Krzysztof > > OK, so I'll update subject and commit message to signal that we only > update the example code. Either convert it or leave it alone. If you are worried about users' DTs being wrong due to copying a bad example, then you should care enough to do the conversion. Given the errors we find in examples, it's likely not the only problem. Rob