Re: [PATCH 4/4] hwmon: add MP9941 driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 6/7/24 02:05, Noah Wang wrote:
Add support for MPS step-down converter mp9941. This driver exposes
telemetry and limit value readings and writtings.

Signed-off-by: Noah Wang <noahwang.wang@xxxxxxxxxxx>
---
  Documentation/hwmon/index.rst  |   1 +
  Documentation/hwmon/mp9941.rst |  92 +++++++++
  MAINTAINERS                    |   7 +
  drivers/hwmon/pmbus/Kconfig    |   9 +
  drivers/hwmon/pmbus/Makefile   |   1 +
  drivers/hwmon/pmbus/mp9941.c   | 328 +++++++++++++++++++++++++++++++++
  6 files changed, 438 insertions(+)
  create mode 100644 Documentation/hwmon/mp9941.rst
  create mode 100644 drivers/hwmon/pmbus/mp9941.c

diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index 9d9d55b889f2..9ff8149d9a9d 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -169,6 +169,7 @@ Hardware Monitoring Kernel Drivers
     mp2993
     mp5023
     mp5990
+   mp9941
     mpq8785
     nct6683
     nct6775
diff --git a/Documentation/hwmon/mp9941.rst b/Documentation/hwmon/mp9941.rst
new file mode 100644
index 000000000000..1274fa20e256
--- /dev/null
+++ b/Documentation/hwmon/mp9941.rst
@@ -0,0 +1,92 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver mp9941
+====================
+
+Supported chips:
+
+  * MPS mp9941
+
+    Prefix: 'mp9941'
+
+  * Datasheet
+    https://scnbwymvp-my.sharepoint.com/:f:/g/personal/admin_scnbwy_com/Eth4kX1_J1hMsaASHiOYL4QBHU5a75r-tRfLKbHnJFdKLQ?e=vxj3DF
+
+Author:
+
+	Noah Wang <noahwang.wang@xxxxxxxxxxx>
+
+Description
+-----------
+
+This driver implements support for Monolithic Power Systems, Inc. (MPS)
+MP9941 digital step-down converter.
+
+Device compliant with:
+
+- PMBus rev 1.3 interface.
+
+The driver exports the following attributes via the 'sysfs' files
+for input voltage:
+
+**in1_input**
+
+**in1_label**
+
+**in1_crit**
+
+**in1_crit_alarm**
+
+The driver provides the following attributes for output voltage:
+
+**in2_input**
+
+**in2_label**
+
+**in2_lcrit**
+
+**in2_lcrit_alarm**
+
+**in2_rated_max**
+
+**in2_rated_min**
+
+The driver provides the following attributes for input current:
+
+**curr1_input**
+
+**curr1_label**
+
+**curr1_max**
+
+**curr1_max_alarm**
+
+The driver provides the following attributes for output current:
+
+**curr2_input**
+
+**curr2_label**
+
+The driver provides the following attributes for input power:
+
+**power1_input**
+
+**power1_label**
+
+The driver provides the following attributes for output power:
+
+**power2_input**
+
+**power2_label**
+
+The driver provides the following attributes for temperature:
+
+**temp1_input**
+
+**temp1_crit**
+
+**temp1_crit_alarm**
+
+**temp1_max**
+
+**temp1_max_alarm**
diff --git a/MAINTAINERS b/MAINTAINERS
index f47f3e13b004..d4600533a3ee 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15265,6 +15265,13 @@ F:	drivers/video/backlight/mp3309c.c
  +F:	Documentation/hwmon/mp2993.rst
  +F:	drivers/hwmon/pmbus/mp2993.c
++MPS MP9941 DRIVER
++M:	Noah Wang <noahwang.wang@xxxxxxxxxxx>
++L:	linux-hwmon@xxxxxxxxxxxxxxx
++S:	Maintained
++F:	Documentation/hwmon/mp9941.rst
++F:	drivers/hwmon/pmbus/mp9941.c
+
  MR800 AVERMEDIA USB FM RADIO DRIVER
  M:	Alexey Klimov <klimov.linux@xxxxxxxxx>
  L:	linux-media@xxxxxxxxxxxxxxx
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index d875d31ce84c..7d32cfc19820 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -380,6 +380,15 @@ config SENSORS_MP5990
  	  This driver can also be built as a module. If so, the module will
  	  be called mp5990.
+config SENSORS_MP9941
+	tristate "MPS MP9941"
+	help
+	  If you say yes here you get hardware monitoring support for MPS
+	  MP9941.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called mp9941.
+
  config SENSORS_MPQ7932_REGULATOR
  	bool "Regulator support for MPQ7932"
  	depends on SENSORS_MPQ7932 && REGULATOR
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index 312d3f0c0540..6c7177fde355 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -40,6 +40,7 @@ obj-$(CONFIG_SENSORS_MP2975)	+= mp2975.o
  obj-$(CONFIG_SENSORS_MP2993)	+= mp2993.o
  obj-$(CONFIG_SENSORS_MP5023)	+= mp5023.o
  obj-$(CONFIG_SENSORS_MP5990)	+= mp5990.o
+obj-$(CONFIG_SENSORS_MP9941)	+= mp9941.o
  obj-$(CONFIG_SENSORS_MPQ7932)	+= mpq7932.o
  obj-$(CONFIG_SENSORS_MPQ8785)	+= mpq8785.o
  obj-$(CONFIG_SENSORS_PLI1209BC)	+= pli1209bc.o
diff --git a/drivers/hwmon/pmbus/mp9941.c b/drivers/hwmon/pmbus/mp9941.c
new file mode 100644
index 000000000000..d24e98671e16
--- /dev/null
+++ b/drivers/hwmon/pmbus/mp9941.c
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for MPS Multi-phase Digital VR Controllers(MP9941)
+ */
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include "pmbus.h"
+
+/*
+ * Vender specific registers. The MFR_ICC_MAX(0x02) is used to
+ * config the iin scale. The MFR_RESO_SET(0xC7) is used to
+ * config the vout format. The MFR_VR_MULTI_CONFIG_R1(0x0D) is
+ * used to identify the vout vid step.
+ */
+#define MFR_ICC_MAX	0x02
+#define MFR_RESO_SET	0xC7
+#define MFR_VR_MULTI_CONFIG_R1	0x0D
+
+#define MP9941_VIN_LIMIT_UINT	1
+#define MP9941_VIN_LIMIT_DIV	8
+#define MP9941_READ_VIN_UINT	1
+#define MP9941_READ_VIN_DIV	32
+
+#define MP9941_PAGE_NUM	1
+
+#define MP9941_RAIL1_FUNC	(PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | \
+							PMBUS_HAVE_IOUT | PMBUS_HAVE_POUT | \
+							PMBUS_HAVE_TEMP | PMBUS_HAVE_PIN | \
+							PMBUS_HAVE_IIN | \
+							PMBUS_HAVE_STATUS_VOUT | \
+							PMBUS_HAVE_STATUS_IOUT | \
+							PMBUS_HAVE_STATUS_TEMP | \
+							PMBUS_HAVE_STATUS_INPUT)
+
+struct mp9941_data {
+	struct pmbus_driver_info info;
+	int vid_resolution;
+};
+
+#define to_mp9941_data(x) container_of(x, struct mp9941_data, info)
+
+static int mp2993_set_vout_format(struct i2c_client *client)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_read_word_data(client, MFR_RESO_SET);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * page = 0, MFR_RESO_SET[7:6] defines the vout format
+	 * 2'b11 set the vout format as direct
+	 */
+	ret = (ret & ~GENMASK(7, 6)) | FIELD_PREP(GENMASK(7, 6), 3);
+
+	ret = i2c_smbus_write_word_data(client, MFR_RESO_SET, ret);
+	if (ret < 0)
+		return ret;
+

i2c_smbus_write_word_data() returns 0 or an error code. The above
is therefore not necessary.
	return i2c_smbus_write_word_data(client, MFR_RESO_SET, ret);
is sufficient. Same everythere else where the same pattern is used.

Thanks,
Guenter





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux