[PATCH v4 1/8] dt-bindings: counter: Add new ti,am62-eqep compatible

[Judith Mendez <jm@xxxxxx>]

Add new compatible ti,am62-eqep for TI K3 devices. If a device
uses this compatible, require power-domains property.

Since there is only one functional and interface clock for eqep,
clock-names is not really required, so removed from required
section, make it optional for ti,am3352-eqep compatible, and
update the example.

The clock-name also changed for TI K3 SoCs so do not allow
clock-names property for the new compatible.

While we are here, add an example using ti,am62-eqep compatible.

Signed-off-by: Judith Mendez <jm@xxxxxx>
Acked-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
Reviewed-by: David Lechner <david@xxxxxxxxxxxxxx>
---
Changes since v3:
- No change
---
 .../devicetree/bindings/counter/ti-eqep.yaml  | 44 ++++++++++++++++---
 1 file changed, 39 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/counter/ti-eqep.yaml b/Documentation/devicetree/bindings/counter/ti-eqep.yaml
index 85f1ff83afe72..54611e06064a2 100644
--- a/Documentation/devicetree/bindings/counter/ti-eqep.yaml
+++ b/Documentation/devicetree/bindings/counter/ti-eqep.yaml
@@ -11,7 +11,9 @@ maintainers:
 
 properties:
   compatible:
-    const: ti,am3352-eqep
+    enum:
+      - ti,am3352-eqep
+      - ti,am62-eqep
 
   reg:
     maxItems: 1
@@ -21,19 +23,35 @@ properties:
     maxItems: 1
 
   clocks:
-    description: The clock that determines the SYSCLKOUT rate for the eQEP
-      peripheral.
+    description: The functional and interface clock that determines the clock
+      rate for the eQEP peripheral.
     maxItems: 1
 
   clock-names:
     const: sysclkout
 
+  power-domains:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,am62-eqep
+    then:
+      properties:
+        clock-names: false
+
+      required:
+        - power-domains
+
 required:
   - compatible
   - reg
   - interrupts
   - clocks
-  - clock-names
 
 additionalProperties: false
 
@@ -43,8 +61,24 @@ examples:
         compatible = "ti,am3352-eqep";
         reg = <0x180 0x80>;
         clocks = <&l4ls_gclk>;
-        clock-names = "sysclkout";
         interrupts = <79>;
     };
 
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        eqep1: counter@23210000 {
+          compatible = "ti,am62-eqep";
+          reg = <0x00 0x23210000 0x00 0x100>;
+          power-domains = <&k3_pds 60 TI_SCI_PD_EXCLUSIVE>;
+          clocks = <&k3_clks 60 0>;
+          interrupts = <GIC_SPI 117 IRQ_TYPE_EDGE_RISING>;
+          status = "disabled";
+        };
+    };
 ...
-- 
2.45.1