Before commit 74be4babe72f ("net: dsa: do not enable or disable non user ports"), gswip_port_enable/disable() were also executed for the cpu port in gswip_setup() which disabled the cpu port during initialization. Let's restore this by removing the dsa_is_user_port checks. Also, let's clean up the gswip_port_enable() function so that we only have to check for the cpu port once. The operation reordering done here is safe. Signed-off-by: Martin Schiller <ms@xxxxxxxxxx> --- drivers/net/dsa/lantiq_gswip.c | 24 ++++++++---------------- 1 file changed, 8 insertions(+), 16 deletions(-) diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c index c1f9419af35f..8ec329d0c136 100644 --- a/drivers/net/dsa/lantiq_gswip.c +++ b/drivers/net/dsa/lantiq_gswip.c @@ -695,13 +695,18 @@ static int gswip_port_enable(struct dsa_switch *ds, int port, struct gswip_priv *priv = ds->priv; int err; - if (!dsa_is_user_port(ds, port)) - return 0; - if (!dsa_is_cpu_port(ds, port)) { + u32 mdio_phy = 0; + err = gswip_add_single_port_br(priv, port, true); if (err) return err; + + if (phydev) + mdio_phy = phydev->mdio.addr & GSWIP_MDIO_PHY_ADDR_MASK; + + gswip_mdio_mask(priv, GSWIP_MDIO_PHY_ADDR_MASK, mdio_phy, + GSWIP_MDIO_PHYp(port)); } /* RMON Counter Enable for port */ @@ -714,16 +719,6 @@ static int gswip_port_enable(struct dsa_switch *ds, int port, gswip_switch_mask(priv, 0, GSWIP_SDMA_PCTRL_EN, GSWIP_SDMA_PCTRLp(port)); - if (!dsa_is_cpu_port(ds, port)) { - u32 mdio_phy = 0; - - if (phydev) - mdio_phy = phydev->mdio.addr & GSWIP_MDIO_PHY_ADDR_MASK; - - gswip_mdio_mask(priv, GSWIP_MDIO_PHY_ADDR_MASK, mdio_phy, - GSWIP_MDIO_PHYp(port)); - } - return 0; } @@ -731,9 +726,6 @@ static void gswip_port_disable(struct dsa_switch *ds, int port) { struct gswip_priv *priv = ds->priv; - if (!dsa_is_user_port(ds, port)) - return; - gswip_switch_mask(priv, GSWIP_FDMA_PCTRL_EN, 0, GSWIP_FDMA_PCTRLp(port)); gswip_switch_mask(priv, GSWIP_SDMA_PCTRL_EN, 0, -- 2.39.2