On Wed 15 May 2024 at 21:47, Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx> wrote:
> The 'syspll' PLL, also known as the system PLL, is a general and
> essential PLL responsible for generating the CPU clock frequency.
> With its wide-ranging capabilities, it is designed to accommodate
> frequencies within the range of 768MHz to 1536MHz.
>
> Signed-off-by: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
> ---
> drivers/clk/meson/a1-pll.c | 72 ++++++++++++++++++++++++++++++++++++++
> drivers/clk/meson/a1-pll.h | 6 ++++
> 2 files changed, 78 insertions(+)
>
> diff --git a/drivers/clk/meson/a1-pll.c b/drivers/clk/meson/a1-pll.c
> index 60b2e53e7e51..286e83199d17 100644
> --- a/drivers/clk/meson/a1-pll.c
> +++ b/drivers/clk/meson/a1-pll.c
> @@ -138,6 +138,76 @@ static struct clk_regmap hifi_pll = {
> },
> };
>
> +static const struct pll_mult_range sys_pll_mult_range = {
> + .min = 32,
> + .max = 64,
> +};
> +
> +static const struct reg_sequence sys_pll_init_regs[] = {
> + { .reg = ANACTRL_SYSPLL_CTRL1, .def = 0x01800000 },
> + { .reg = ANACTRL_SYSPLL_CTRL2, .def = 0x00001100 },
> + { .reg = ANACTRL_SYSPLL_CTRL3, .def = 0x10022300 },
> + { .reg = ANACTRL_SYSPLL_CTRL4, .def = 0x00300000 },
> + { .reg = ANACTRL_SYSPLL_CTRL0, .def = 0x01f18432 },
That last entry is clearly an hard coded rate being poked.
Drop it please
> +};
> +
> +static struct clk_regmap sys_pll = {
> + .data = &(struct meson_clk_pll_data){
> + .en = {
> + .reg_off = ANACTRL_SYSPLL_CTRL0,
> + .shift = 28,
> + .width = 1,
> + },
> + .m = {
> + .reg_off = ANACTRL_SYSPLL_CTRL0,
> + .shift = 0,
> + .width = 8,
> + },
> + .n = {
> + .reg_off = ANACTRL_SYSPLL_CTRL0,
> + .shift = 10,
> + .width = 5,
> + },
> + .frac = {
> + .reg_off = ANACTRL_SYSPLL_CTRL1,
> + .shift = 0,
> + .width = 19,
> + },
> + .l = {
> + .reg_off = ANACTRL_SYSPLL_STS,
> + .shift = 31,
> + .width = 1,
> + },
> + .current_en = {
> + .reg_off = ANACTRL_SYSPLL_CTRL0,
> + .shift = 26,
> + .width = 1,
> + },
> + .l_detect = {
> + .reg_off = ANACTRL_SYSPLL_CTRL2,
> + .shift = 6,
> + .width = 1,
> + },
> + .range = &sys_pll_mult_range,
> + .init_regs = sys_pll_init_regs,
> + .init_count = ARRAY_SIZE(sys_pll_init_regs),
> + /*
> + * The sys_pll clock is usually enabled and initialized in the
> + * bootloader stage. Additionally, the cpu_clk is connected to
> + * sys_pll. As a result, it is not allowed to initialize the
> + * cpu_clk again, as doing so would prevent the CPU from
> + * executing any instructions.
> + */
> + .flags = CLK_MESON_PLL_NOINIT_ENABLED,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "sys_pll",
> + .ops = &meson_clk_pll_ops,
> + .parent_names = (const char *[]){ "syspll_in" },
> + .num_parents = 1,
> + },
> +};
> +
> static struct clk_fixed_factor fclk_div2_div = {
> .mult = 1,
> .div = 2,
> @@ -283,6 +353,7 @@ static struct clk_hw *a1_pll_hw_clks[] = {
> [CLKID_FCLK_DIV5] = &fclk_div5.hw,
> [CLKID_FCLK_DIV7] = &fclk_div7.hw,
> [CLKID_HIFI_PLL] = &hifi_pll.hw,
> + [CLKID_SYS_PLL] = &sys_pll.hw,
> };
>
> static struct clk_regmap *const a1_pll_regmaps[] = {
> @@ -293,6 +364,7 @@ static struct clk_regmap *const a1_pll_regmaps[] = {
> &fclk_div5,
> &fclk_div7,
> &hifi_pll,
> + &sys_pll,
> };
>
> static struct regmap_config a1_pll_regmap_cfg = {
> diff --git a/drivers/clk/meson/a1-pll.h b/drivers/clk/meson/a1-pll.h
> index 4be17b2bf383..666d9b2137e9 100644
> --- a/drivers/clk/meson/a1-pll.h
> +++ b/drivers/clk/meson/a1-pll.h
> @@ -18,6 +18,12 @@
> #define ANACTRL_FIXPLL_CTRL0 0x0
> #define ANACTRL_FIXPLL_CTRL1 0x4
> #define ANACTRL_FIXPLL_STS 0x14
> +#define ANACTRL_SYSPLL_CTRL0 0x80
> +#define ANACTRL_SYSPLL_CTRL1 0x84
> +#define ANACTRL_SYSPLL_CTRL2 0x88
> +#define ANACTRL_SYSPLL_CTRL3 0x8c
> +#define ANACTRL_SYSPLL_CTRL4 0x90
> +#define ANACTRL_SYSPLL_STS 0x94
> #define ANACTRL_HIFIPLL_CTRL0 0xc0
> #define ANACTRL_HIFIPLL_CTRL1 0xc4
> #define ANACTRL_HIFIPLL_CTRL2 0xc8
--
Jerome
