Describe the optional reset gpio (which may not be wired up). Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx> Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx> Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx> --- Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml index 0c75d8bde568..e1e05921afb4 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml @@ -29,6 +29,9 @@ properties: description: Parent interrupt. + reset-gpios: + maxItems: 1 + "#interrupt-cells": const: 2 @@ -97,6 +100,7 @@ additionalProperties: false examples: - | + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/mfd/qcom-pm8008.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -115,6 +119,8 @@ examples: interrupt-parent = <&tlmm>; interrupts = <32 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&tlmm 42 GPIO_ACTIVE_LOW>; + pm8008_gpios: gpio@c000 { compatible = "qcom,pm8008-gpio", "qcom,spmi-gpio"; reg = <0xc000>; -- 2.44.1