[PATCH v2 2/2] ARM: dts: socfpga: Add support for Terasic DE1-SOC board

[Florian Vaussard <florian.vaussard@xxxxxxxxx>]

Compared to Terasic SoCKit, here are some of the notable differences
on the HPS side:
- Only 1 user LED and 1 user KEY
- The QSPI Flash is not populated
- The ADXL345 accelerometer is on I2C0 instead of I2C1

Tested to be working:
- LED / KEY
- Ethernet
- Both USB Host ports
- SD card
- ADXL345 accelerometer

Signed-off-by: Florian Vaussard <florian.vaussard@xxxxxxxxx>
---
 arch/arm/boot/dts/intel/socfpga/Makefile      |   1 +
 .../socfpga/socfpga_cyclone5_de1_soc.dts      | 109 ++++++++++++++++++
 2 files changed, 110 insertions(+)
 create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_de1_soc.dts

diff --git a/arch/arm/boot/dts/intel/socfpga/Makefile b/arch/arm/boot/dts/intel/socfpga/Makefile
index c467828aeb4b..1d5140b238da 100644
--- a/arch/arm/boot/dts/intel/socfpga/Makefile
+++ b/arch/arm/boot/dts/intel/socfpga/Makefile
@@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += \
 	socfpga_cyclone5_mcvevk.dtb \
 	socfpga_cyclone5_socdk.dtb \
 	socfpga_cyclone5_de0_nano_soc.dtb \
+	socfpga_cyclone5_de1_soc.dtb \
 	socfpga_cyclone5_sockit.dtb \
 	socfpga_cyclone5_socrates.dtb \
 	socfpga_cyclone5_sodia.dtb \
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_de1_soc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_de1_soc.dts
new file mode 100644
index 000000000000..de5a4fe3b0e4
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_de1_soc.dts
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2024 Florian Vaussard <florian.vaussard@xxxxxxxxx>
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Terasic DE1-SOC";
+	compatible = "terasic,de1-soc", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	aliases {
+		/*
+		 * this allows the ethaddr uboot environmnet variable content
+		 * to be added to the gmac1 device tree blob.
+		 */
+		ethernet0 = &gmac1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		hps-led {
+			gpios = <&portb 24 GPIO_ACTIVE_HIGH>;	/* HPS_GPIO53 */
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_GREEN>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		hps-key {
+			label = "hps_key";
+			gpios = <&portb 25 GPIO_ACTIVE_LOW>;	/* HPS_GPIO54 */
+			linux,code = <BTN_0>;
+		};
+	};
+
+	reg_3v3_sd: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+
+	rxd0-skew-ps = <0>;
+	rxd1-skew-ps = <0>;
+	rxd2-skew-ps = <0>;
+	rxd3-skew-ps = <0>;
+	txen-skew-ps = <0>;
+	txc-skew-ps = <2600>;
+	rxdv-skew-ps = <0>;
+	rxc-skew-ps = <2000>;
+};
+
+&gpio0 {	/* GPIO 0..29 */
+	status = "okay";
+};
+
+&gpio1 {	/* GPIO 30..57 */
+	status = "okay";
+};
+
+&gpio2 {	/* GPIO 58..66 (HLGPI 0..13 at offset 13) */
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	accel1: accelerometer@53 {
+		compatible = "adi,adxl345";
+		reg = <0x53>;
+
+		interrupt-parent = <&portc>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_3v3_sd>;
+	vqmmc-supply = <&reg_3v3_sd>;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
-- 
2.45.1