Currently both am33xx and am43xx have the macro for SLEWCTRL_FAST in pinctrl dt-bindings reversed so that selecting the macro actually sets SLEWCTRL_SLOW in the pad control registers. These patches correct the bindings but leave the pinctrl states that use the binding *UNMODIFIED*. Previously i2c and mdio on am33xx and i2c, mdio, and uart on am43xx had been using this macro and selecting SLEWCTRL_FAST while actually programming SLEWCTRL_SLOW in the pad config registers. Because the intended selection was SLEWCTRL_FAST the macros are unchanged. I tested on am335x-gp-evm and am437x-gp-evm with no difference in functionality seen. Regards, Dave Dave Gerlach (2): pinctrl: am33xx: dt-bindings: fix SLEWCTRL_FAST binding pinctrl: am43xx: dt-bindings: fix SLEWCTRL_FAST binding include/dt-bindings/pinctrl/am33xx.h | 3 ++- include/dt-bindings/pinctrl/am43xx.h | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) -- 2.3.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
