Re: [PATCH 12/14] dt-bindings: display: rockchip,dw-hdmi: Add compatible for RK3588

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 6/6/24 2:22 AM, Rob Herring wrote:
> On Sat, Jun 01, 2024 at 04:12:34PM +0300, Cristian Ciocaltea wrote:
>> Document the Synopsys DesignWare HDMI 2.1 Quad-Pixel (QP) TX controller
>> found on Rockchip RK3588 SoC family.
>>
>> Since RK3588 uses different clocks than previous Rockchip SoCs and also
>> requires a couple of reset lines and some additional properties, provide
>> the required changes in the binding to accommodate all variants.
>>
>> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxxxxxx>
>> ---
>>  .../display/rockchip/rockchip,dw-hdmi.yaml         | 127 +++++++++++++++------
>>  1 file changed, 90 insertions(+), 37 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
>> index 2aac62219ff6..60d6b815227f 100644
>> --- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
>> +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
>> @@ -10,12 +10,10 @@ maintainers:
>>    - Mark Yao <markyao0591@xxxxxxxxx>
>>  
>>  description: |
>> -  The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
>> -  with a companion PHY IP.
>> -
>> -allOf:
>> -  - $ref: ../bridge/synopsys,dw-hdmi.yaml#
>> -  - $ref: /schemas/sound/dai-common.yaml#
>> +  For SoCs up to RK3568, the HDMI transmitter is a Synopsys DesignWare
>> +  HDMI 1.4 TX controller IP with a companion PHY IP.
>> +  The RK3588 SoC integrates the Synopsys DesignWare HDMI 2.1 Quad-Pixel (QP)
>> +  TX controller IP and a HDMI/eDP TX Combo PHY based on a Samsung IP block.
>>  
>>  properties:
>>    compatible:
>> @@ -25,6 +23,7 @@ properties:
>>        - rockchip,rk3328-dw-hdmi
>>        - rockchip,rk3399-dw-hdmi
>>        - rockchip,rk3568-dw-hdmi
>> +      - rockchip,rk3588-dw-hdmi
>>  
>>    reg-io-width:
>>      const: 4
>> @@ -40,36 +39,6 @@ properties:
>>        A 1.8V supply that powers up the SoC internal circuitry. The pin name on the
>>        SoC usually is HDMI_TX_AVDD_1V8.
>>  
>> -  clocks:
>> -    minItems: 2
>> -    items:
>> -      - {}
>> -      - {}
>> -      # The next three clocks are all optional, but shall be specified in this
>> -      # order when present.
>> -      - description: The HDMI CEC controller main clock
>> -      - description: Power for GRF IO
>> -      - description: External clock for some HDMI PHY (old clock name, deprecated)
>> -      - description: External clock for some HDMI PHY (new name)
>> -
>> -  clock-names:
>> -    minItems: 2
>> -    items:
>> -      - {}
>> -      - {}
>> -      - enum:
>> -          - cec
>> -          - grf
>> -          - vpll
>> -          - ref
>> -      - enum:
>> -          - grf
>> -          - vpll
>> -          - ref
>> -      - enum:
>> -          - vpll
>> -          - ref
>> -
>>    ddc-i2c-bus:
>>      $ref: /schemas/types.yaml#/definitions/phandle
>>      description:
>> @@ -131,13 +100,97 @@ properties:
>>  required:
>>    - compatible
>>    - reg
>> -  - reg-io-width
>>    - clocks
>>    - clock-names
>>    - interrupts
>>    - ports
>>    - rockchip,grf
>>  
>> +allOf:
>> +  - $ref: /schemas/sound/dai-common.yaml#
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          contains:
>> +            enum:
>> +              - rockchip,rk3588-dw-hdmi
>> +    then:
>> +      properties:
>> +        reg:
>> +          maxItems: 1
>> +
>> +        clocks:
>> +          minItems: 1
>> +          items:
>> +            - description: APB system interface clock
>> +            # The next clocks are optional, but shall be specified in this
>> +            # order when present.
>> +            - description: TMDS/FRL link clock
>> +            - description: EARC RX biphase clock
>> +            - description: Reference clock
>> +            - description: Audio interface clock
>> +            - description: Video datapath clock
>> +
>> +        clock-names:
>> +          minItems: 1
>> +          items:
>> +            - const: pclk
>> +            - enum: [hdp, earc, ref, aud, hclk_vo1]
>> +            - enum: [earc, ref, aud, hclk_vo1]
>> +            - enum: [ref, aud, hclk_vo1]
>> +            - enum: [aud, hclk_vo1]
>> +            - const: hclk_vo1
>> +
>> +        resets:
>> +          minItems: 2
>> +          maxItems: 2
>> +
>> +        reset-names:
>> +          items:
>> +            - const: ref
>> +            - const: hdp
>> +
>> +        interrupts:
>> +          minItems: 1
>> +          maxItems: 5
>> +
>> +        rockchip,vo1_grf:
>> +          $ref: /schemas/types.yaml#/definitions/phandle
>> +          description: Some QP related data is accessed through VO1 GRF regs
>> +
>> +      required:
>> +        - resets
>> +        - reset-names
>> +        - rockchip,vo1_grf
>> +
>> +    else:
>> +      $ref: ../bridge/synopsys,dw-hdmi.yaml#
> 
> This is odd... With this plus the amount of conditional schema, I think 
> this should be a new schema doc. Doesn't have to have a common 
> schema. You can let the 2nd user of this IP block do that. 

Yes, v2 is going to be a completely separated driver implementation.

> Though if you 
> have the Synopsys spec, then it would be good to use it and be sure the 
> binding corresponds to it.

Unfortunately I don't have it.

@Andy: Could you please help identifying the properties which should
belong to a common synopsys,dw-hdmi-qp schema?

Thanks,
Cristian




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux