Add the Serial Flash Controller and it's pincontrols. Signed-off-by: Alex Bee <knaerzche@xxxxxxxxx> --- changes since v1: - none arch/arm/boot/dts/rockchip/rk3128.dtsi | 35 ++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/arch/arm/boot/dts/rockchip/rk3128.dtsi b/arch/arm/boot/dts/rockchip/rk3128.dtsi index a7ab0904564f..22e2a35dedb1 100644 --- a/arch/arm/boot/dts/rockchip/rk3128.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3128.dtsi @@ -399,6 +399,15 @@ usb_host_ohci: usb@101e0000 { status = "disabled"; }; + sfc: spi@1020c000 { + compatible = "rockchip,sfc"; + reg = <0x1020c000 0x8000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>; + clock-names = "clk_sfc", "hclk_sfc"; + status = "disabled"; + }; + sdmmc: mmc@10214000 { compatible = "rockchip,rk3128-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x10214000 0x4000>; @@ -1155,6 +1164,32 @@ sdmmc_bus4: sdmmc-bus4 { }; }; + sfc { + sfc_bus2: sfc-bus2 { + rockchip,pins = <1 RK_PD0 3 &pcfg_pull_default>, + <1 RK_PD1 3 &pcfg_pull_default>; + }; + + sfc_bus4: sfc-bus4 { + rockchip,pins = <1 RK_PD0 3 &pcfg_pull_default>, + <1 RK_PD1 3 &pcfg_pull_default>, + <1 RK_PD2 3 &pcfg_pull_default>, + <1 RK_PD3 3 &pcfg_pull_default>; + }; + + sfc_clk: sfc-clk { + rockchip,pins = <2 RK_PA4 3 &pcfg_pull_none>; + }; + + sfc_cs0: sfc-cs0 { + rockchip,pins = <2 RK_PA2 3 &pcfg_pull_default>; + }; + + sfc_cs1: sfc-cs1 { + rockchip,pins = <2 RK_PA3 3 &pcfg_pull_default>; + }; + }; + spdif { spdif_tx: spdif-tx { rockchip,pins = <3 RK_PD3 1 &pcfg_pull_none>; -- 2.45.2