Re: [PATCHv2 05/15] ARM: mvebu: add stdout-path to all armada-*.dts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Fri, Feb 27, 2015 at 10:48 AM, Thomas Petazzoni
<thomas.petazzoni@xxxxxxxxxxxxxxxxxx> wrote:
> Rob, Mark,
>
> On Mon, 23 Feb 2015 10:50:26 -0600, Rob Herring wrote:
>> On Mon, Feb 23, 2015 at 10:00 AM, Gregory CLEMENT
>
>> Not exactly, stdout-path allows for removing "console" from the
>> command line. earlyprintk is a debug/developer option, so it should
>> not be in a default command line IMO.
>>
>> So bootargs should be removed entirely.
>
> Unfortunately, this doesn't seem to work at all:

This must have all been tested on QEMU (or Fast Models?) which ignores
baud rate.

>  - Setting /chosen/stdout-path = &uart0; and still console=ttyS0,115200
>    in /chosen/bootargs works fine. I see a call to
>    add_preferred_console fairly early in the boot:
>
> [    0.000000] Kernel command line: loglevel=8 ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs console=ttyS0,115200 earlyprintk
> [    0.000000] ------> name=ttyS, idx=0, options=115200, brl_options=(null)
> [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
>
>    But of course, this is not the case we're interested in. Note that
>    the line "------>" is printed in __add_preferred_console().
>
>  - Setting just /chosen/stdout-path = &uart0; and removing
>    completely /chosen/bootargs, there are no kernel messages displayed
>    at all. Fortunately, my userspace hooks up on ttyS0, so I can run
>    "dmesg" and see when add_preferred_console gets called, and with
>    what arguments. It gets called much, much later, i.e only when the
>    serial port itself is initialized:
>
> [    0.484951] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
> [    0.486822] ------> name=ttyS, idx=0, options=(null), brl_options=(null)
> [    0.506838] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 21, base_baud = 12500000) is a 16550A
> [    9.106098] console [ttyS0] enabled
>
>    So it gets the right port name, the right idx, just the options are
>    null. It shouldn't be an issue since the serial port is already
>    initialized by the bootloader.

I think the default baudrate is 9600, not what the bootloader set.

>  - So I tried something like stdout-path = "serial0@12000:115200n8";
>    and here the result is even more interesting: it simply crashes the
>    kernel! So some random data in DT makes the stuff crash.

You need the full path here though. But garbage should not crash things.

Peter Hurley found just yesterday that the path parsing doesn't work
right with options. Only alias parsing works.

> [    0.000000]  ==> of_alias_scan: serial0@12000:115200n8
> [    0.000000] Unable to handle kernel NULL pointer dereference at virtual address 0000000c
> [    0.000000] pgd = c0004000
> [    0.000000] [0000000c] *pgd=00000000
> [    0.000000] Internal error: Oops: 5 [#1] SMP ARM
> [    0.000000] Modules linked in:
> [    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.0.0-rc1-00016-g0d60469-dirty #466
> [    0.000000] Hardware name: Marvell Armada 39x (Device Tree)
> [    0.000000] task: c088b468 ti: c0886000 task.ti: c0886000
> [    0.000000] PC is at of_alias_scan+0xa4/0x2bc
> [    0.000000] LR is at of_find_node_opts_by_path+0xac/0x230
> [    0.000000] pc : [<c03b62b4>]    lr : [<c03b4b68>]    psr: 600001d3
> [    0.000000] sp : c0887f38  ip : 00000000  fp : c08e05a4
> [    0.000000] r10: 80000200  r9 : c05df908  r8 : c06aec30
> [    0.000000] r7 : c088c3a4  r6 : c0890728  r5 : c253dba0  r4 : c08eb334
> [    0.000000] r3 : 00000000  r2 : c253dbae  r1 : 00000000  r0 : c0630594
> [    0.000000] Flags: nZCv  IRQs off  FIQs off  Mode SVC_32  ISA ARM  Segment kernel
> [    0.000000] Control: 10c5387d  Table: 0000404a  DAC: 00000015
> [    0.000000] Process swapper (pid: 0, stack limit = 0xc0886220)
> [    0.000000] Stack: (0xc0887f38 to 0xc0888000)
> [    0.000000] 7f20:                                                       00000000 0002f7ff
> [    0.000000] 7f40: 00001000 00002370 00000001 c0888408 c06b8a2c c0890728 c088c3a4 ef7fce40
> [    0.000000] 7f60: c05df908 80000200 c08e05a4 c06942bc ffffffff 10c5387d c08c2e00 c0887fd4
> [    0.000000] 7f80: 00000000 00000000 00000000 c0053f98 c05de48c c0887fb4 00000000 00000000
> [    0.000000] 7fa0: c08c2cc0 c0888400 ffffffff c08c2cc0 00000000 00000000 00000000 c0691960
> [    0.000000] 7fc0: 00000000 00000000 00000000 00000000 00000000 c06c3a78 c08c2f54 c0888480
> [    0.000000] 7fe0: c06c3a74 c088c4b4 0000406a 414fc091 00000000 00008074 00000000 00000000
> [    0.000000] [<c03b62b4>] (of_alias_scan) from [<c06942bc>] (setup_arch+0x6bc/0x8b8)
> [    0.000000] [<c06942bc>] (setup_arch) from [<c0691960>] (start_kernel+0xa0/0x3a0)
> [    0.000000] [<c0691960>] (start_kernel) from [<00008074>] (0x8074)
> [    0.000000] Code: e594300c e3000594 e5942010 e34c0063 (e593100c)
> [    0.000000] ---[ end trace cb88537fdc8fa200 ]---
> [    0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
> [    0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!
>
> It is worth mentioning that this also happens with
>
>      stdout-path = "uart0:115200n8";
>
> which was explicitly suggested by Mark in his e-mail. uart0 is an alias
> to the proper DT node, since stdout-path = &uart0; works almost fine.

Mark forgot the '&'. So does 'stdout-path = "&uart0:115200n8";' work?

Rob
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux