From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx> Add nodes for remoteprocs: ADSP, CDSP0, CDSP1, GPDSP0 and GPDSP1 for SA8775p SoCs. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> Signed-off-by: Tengfei Fan <quic_tengfan@xxxxxxxxxxx> Co-developed-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sa8775p.dtsi | 332 ++++++++++++++++++++++++++++++++++ 1 file changed, 332 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi index efd588fa2abb..2aebc2a95e5a 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi @@ -10,6 +10,7 @@ #include <dt-bindings/clock/qcom,sa8775p-gpucc.h> #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h> #include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/power/qcom,rpmhpd.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> @@ -557,6 +558,121 @@ cpucp_fw_mem: cpucp-fw@db200000 { }; }; + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp0 { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + smp2p_cdsp0_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_cdsp0_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp1 { + compatible = "qcom,smp2p"; + qcom,smem = <617>, <616>; + interrupts-extended = <&ipcc IPCC_CLIENT_NSP1 + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_NSP1 IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <12>; + + smp2p_cdsp1_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_cdsp1_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-gpdsp0 { + compatible = "qcom,smp2p"; + qcom,smem = <617>, <616>; + interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP0 + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_GPDSP0 IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <17>; + + smp2p_gpdsp0_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_gpdsp0_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-gpdsp1 { + compatible = "qcom,smp2p"; + qcom,smem = <617>, <616>; + interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP1 + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_GPDSP1 IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <18>; + + smp2p_gpdsp1_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_gpdsp1_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + soc: soc@0 { compatible = "simple-bus"; #address-cells = <2>; @@ -3438,6 +3554,92 @@ cpufreq_hw: cpufreq@18591000 { #freq-domain-cells = <1>; }; + remoteproc_gpdsp0: remoteproc@20c00000 { + compatible = "qcom,sa8775p-gpdsp0-pas"; + reg = <0x0 0x20c00000 0x0 0x10000>; + + interrupts-extended = <&intc GIC_SPI 768 IRQ_TYPE_EDGE_RISING>, + <&smp2p_gpdsp0_in 0 0>, + <&smp2p_gpdsp0_in 2 0>, + <&smp2p_gpdsp0_in 1 0>, + <&smp2p_gpdsp0_in 3 0>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_CX>, + <&rpmhpd RPMHPD_MXC>; + power-domain-names = "cx", "mxc"; + + interconnects = <&gpdsp_anoc MASTER_DSP0 0 + &config_noc SLAVE_CLK_CTL 0>; + + memory-region = <&pil_gdsp0_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_gpdsp0_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP0 + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_GPDSP0 + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "gpdsp0"; + qcom,remote-pid = <17>; + }; + }; + + remoteproc_gpdsp1: remoteproc@21c00000 { + compatible = "qcom,sa8775p-gpdsp1-pas"; + reg = <0x0 0x21c00000 0x0 0x10000>; + + interrupts-extended = <&intc GIC_SPI 624 IRQ_TYPE_EDGE_RISING>, + <&smp2p_gpdsp1_in 0 0>, + <&smp2p_gpdsp1_in 2 0>, + <&smp2p_gpdsp1_in 1 0>, + <&smp2p_gpdsp1_in 3 0>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_CX>, + <&rpmhpd RPMHPD_MXC>; + power-domain-names = "cx", "mxc"; + + interconnects = <&gpdsp_anoc MASTER_DSP1 0 + &config_noc SLAVE_CLK_CTL 0>; + + memory-region = <&pil_gdsp1_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_gpdsp1_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP1 + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_GPDSP1 + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "gpdsp1"; + qcom,remote-pid = <18>; + }; + }; + ethernet1: ethernet@23000000 { compatible = "qcom,sa8775p-ethqos"; reg = <0x0 0x23000000 0x0 0x10000>, @@ -3507,6 +3709,136 @@ ethernet0: ethernet@23040000 { status = "disabled"; }; + + remoteproc_cdsp0: remoteproc@26300000 { + compatible = "qcom,sa8775p-cdsp0-pas"; + reg = <0x0 0x26300000 0x0 0x10000>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp0_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp0_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp0_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp0_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_CX>, + <&rpmhpd RPMHPD_MXC>, + <&rpmhpd RPMHPD_NSP0>; + power-domain-names = "cx", "mxc", "nsp"; + + interconnects = <&nspa_noc MASTER_CDSP_PROC 0 + &mc_virt SLAVE_EBI1 0>; + + memory-region = <&pil_cdsp0_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_cdsp0_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "cdsp"; + qcom,remote-pid = <5>; + }; + }; + + remoteproc_cdsp1: remoteproc@2a300000 { + compatible = "qcom,sa8775p-cdsp1-pas"; + reg = <0x0 0x2A300000 0x0 0x10000>; + + interrupts-extended = <&intc GIC_SPI 798 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp1_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp1_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp1_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp1_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_CX>, + <&rpmhpd RPMHPD_MXC>, + <&rpmhpd RPMHPD_NSP1>; + power-domain-names = "cx", "mxc", "nsp"; + + interconnects = <&nspb_noc MASTER_CDSP_PROC_B 0 + &mc_virt SLAVE_EBI1 0>; + + memory-region = <&pil_cdsp1_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_cdsp1_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_NSP1 + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_NSP1 + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "cdsp1"; + qcom,remote-pid = <12>; + }; + }; + + remoteproc_adsp: remoteproc@30000000 { + compatible = "qcom,sa8775p-adsp-pas"; + reg = <0x0 0x30000000 0x0 0x100>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_LCX>, + <&rpmhpd RPMHPD_LMX>; + power-domain-names = "lcx", "lmx"; + + interconnects = <&lpass_ag_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>; + + memory-region = <&pil_adsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + remoteproc_adsp_glink: glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + }; + }; }; thermal-zones { -- 2.43.0