Hello Kelvin, Junyi
On 6/5/24 05:44, Kelvin Zhang via B4 Relay wrote:
From: Junyi Zhao <junyi.zhao@xxxxxxxxxxx>
Add support for Amlogic S4 PWM.
Signed-off-by: Junyi Zhao <junyi.zhao@xxxxxxxxxxx>
Signed-off-by: Kelvin Zhang <kelvin.zhang@xxxxxxxxxxx>
---
drivers/pwm/pwm-meson.c | 36 ++++++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
index b2f97dfb01bb..4f01847525b2 100644
--- a/drivers/pwm/pwm-meson.c
+++ b/drivers/pwm/pwm-meson.c
@@ -460,6 +460,34 @@ static int meson_pwm_init_channels_meson8b_v2(struct pwm_chip *chip)
return meson_pwm_init_clocks_meson8b(chip, mux_parent_data);
}
+static void meson_pwm_s4_put_clk(void *data)
+{
+ struct clk *clk = data;
+
+ clk_put(clk);
+}
+
+static int meson_pwm_init_channels_s4(struct pwm_chip *chip)
+{
+ struct device *dev = pwmchip_parent(chip);
+ struct device_node *np = dev->of_node;
+ struct meson_pwm *meson = to_meson_pwm(chip);
+ int i, ret;
+
+ for (i = 0; i < MESON_NUM_PWMS; i++) {
+ meson->channels[i].clk = of_clk_get(np, i);
+ if (IS_ERR(meson->channels[i].clk)) {
+ ret = PTR_ERR(meson->channels[i].clk);
+ dev_err_probe(dev, ret, "Failed to get clk\n");
+ return ret;
+ }
+ devm_add_action_or_reset(dev, meson_pwm_s4_put_clk,
+ meson->channels[i].clk);
devm_add_action_or_reset() result should be checked
+ }
+
+ return 0;
+}
You can rewrite it a bit to always have a single allocation for devm node:
static void meson_pwm_s4_put_clk(void *data)
{
struct meson_pwm *meson = data;
int i;
for (i = 0; i < MESON_NUM_PWMS; i++)
clk_put(meson->channels[i].clk);
}
static int meson_pwm_init_channels_s4(struct pwm_chip *chip)
{
struct device *dev = pwmchip_parent(chip);
struct device_node *np = dev->of_node;
struct meson_pwm *meson = to_meson_pwm(chip);
int i, ret;
ret = devm_add_action(dev, meson_pwm_s4_put_clk, meson);
if (ret)
return ret;
for (i = 0; i < MESON_NUM_PWMS; i++) {
meson->channels[i].clk = of_clk_get(np, i);
if (IS_ERR(meson->channels[i].clk)) {
ret = PTR_ERR(meson->channels[i].clk);
dev_err_probe(dev, ret, "Failed to get clk\n");
return ret;
}
}
return 0;
}
--
Best regards
George