Hi Yannick On 5/6/24 16:49, Yannick Fertre wrote:
Touchscreen reset needs to be configured via the pinctrl not the driver (a pull-down resistor has been soldered onto the reset line which forces the touchscreen to reset state). Interrupt line must have a pull-down resistor in order to freeze the i2c address at 0x5D. Signed-off-by: Yannick Fertre <yannick.fertre@xxxxxxxxxxx> --- arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi | 22 +++++++++++++++++++++ arch/arm/boot/dts/st/stm32mp135f-dk.dts | 14 +++++++++++++ 2 files changed, 36 insertions(+)
Applied on stm32-next. Cheers! alex
