Hi Prabhakar,
CC Greg
On Tue, Jun 4, 2024 at 5:46 PM Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> wrote:
> On Fri, May 24, 2024 at 10:29 AM Prabhakar <prabhakar.csengg@xxxxxxxxx> wrote:
> > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> >
> > Define RZ/V2H(P) (R9A09G057) Clock Pulse Generator module clock outputs
> > (CPG_CLK_ON* registers), and reset definitions (CPG_RST_* registers)
> > in Section 4.4.2 and 4.4.3 ("List of Clock/Reset Signals") of the RZ/V2H(P)
> > Hardware User's Manual (Rev.1.01, Feb. 2024).
>
> Hmm, I must have a slightly different Rev. 1.01 ;-)
>
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
>
> > --- /dev/null
> > +++ b/include/dt-bindings/clock/r9a09g057-cpg.h
> > +/* Clock list */
>
> [...]
>
> > +#define R9A09G057_USB30_CLK_RESERVED0 197
> > +#define R9A09G057_USB30_CLK_RESERVED1 198
> > +#define R9A09G057_USB30_CLK_RESERVED2 199
> > +#define R9A09G057_USB30_CLK_RESERVED3 200
[...]
It has been brought to my attention these had been named *RESERVED*
deliberately, to avoid disclosing their meaning.
As these definitions are part of the DT ABI, and the DTS writer has to
relate the names to the actual clocks in the datasheet, and to the names
used in the DT bindings for the consumer devices (if ever upstreamed),
I find it hard to accept these for upstream inclusion as-is.
What do other people think?
Thanks!
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
