Convert g762 Documentation to yaml schema and port all the custom properties and info. Add the vendor prefix to name to follow naming standard. Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx> Reviewed-by: Rob Herring (Arm) <robh@xxxxxxxxxx> --- Changes v4: - Fix typo - Drop fixed clock - Add Reviewed-by tag Changes v3: - Rename yaml to g762 from g76x .../devicetree/bindings/hwmon/g762.txt | 47 ------------ .../devicetree/bindings/hwmon/gmt,g762.yaml | 72 +++++++++++++++++++ 2 files changed, 72 insertions(+), 47 deletions(-) delete mode 100644 Documentation/devicetree/bindings/hwmon/g762.txt create mode 100644 Documentation/devicetree/bindings/hwmon/gmt,g762.yaml diff --git a/Documentation/devicetree/bindings/hwmon/g762.txt b/Documentation/devicetree/bindings/hwmon/g762.txt deleted file mode 100644 index 6d154c4923de..000000000000 --- a/Documentation/devicetree/bindings/hwmon/g762.txt +++ /dev/null @@ -1,47 +0,0 @@ -GMT G762/G763 PWM Fan controller - -Required node properties: - - - "compatible": must be either "gmt,g762" or "gmt,g763" - - "reg": I2C bus address of the device - - "clocks": a fixed clock providing input clock frequency - on CLK pin of the chip. - -Optional properties: - - - "fan_startv": fan startup voltage. Accepted values are 0, 1, 2 and 3. - The higher the more. - - - "pwm_polarity": pwm polarity. Accepted values are 0 (positive duty) - and 1 (negative duty). - - - "fan_gear_mode": fan gear mode. Supported values are 0, 1 and 2. - -If an optional property is not set in .dts file, then current value is kept -unmodified (e.g. u-boot installed value). - -Additional information on operational parameters for the device is available -in Documentation/hwmon/g762.rst. A detailed datasheet for the device is available -at http://natisbad.org/NAS/refs/GMT_EDS-762_763-080710-0.2.pdf. - -Example g762 node: - - clocks { - #address-cells = <1>; - #size-cells = <0>; - - g762_clk: fixedclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <8192>; - } - } - - g762: g762@3e { - compatible = "gmt,g762"; - reg = <0x3e>; - clocks = <&g762_clk> - fan_gear_mode = <0>; /* chip default */ - fan_startv = <1>; /* chip default */ - pwm_polarity = <0>; /* chip default */ - }; diff --git a/Documentation/devicetree/bindings/hwmon/gmt,g762.yaml b/Documentation/devicetree/bindings/hwmon/gmt,g762.yaml new file mode 100644 index 000000000000..762779da5ba2 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/gmt,g762.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/gmt,g762.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GMT G762/G763 PWM Fan controller + +maintainers: + - Christian Marangi <ansuelsmth@xxxxxxxxx> + +description: | + GMT G762/G763 PWM Fan controller. + + If an optional property is not set in DT, then current value is kept + unmodified (e.g. bootloader installed value). + + Additional information on operational parameters for the device is available + in Documentation/hwmon/g762.rst. A detailed datasheet for the device is available + at http://natisbad.org/NAS/refs/GMT_EDS-762_763-080710-0.2.pdf. + +properties: + compatible: + enum: + - gmt,g762 + - gmt,g763 + + reg: + maxItems: 1 + + clocks: + description: a fixed clock providing input clock frequency on CLK + pin of the chip. + maxItems: 1 + + fan_startv: + description: Fan startup voltage step + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + pwm_polarity: + description: PWM polarity (positive or negative duty) + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + + fan_gear_mode: + description: FAN gear mode. Configure High speed fan setting factor + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + g762@3e { + compatible = "gmt,g762"; + reg = <0x3e>; + clocks = <&g762_clk>; + fan_gear_mode = <0>; + fan_startv = <1>; + pwm_polarity = <0>; + }; + }; -- 2.43.0
