From: Noralf Trønnes <noralf@xxxxxxxxxxx> MIPI DCS write/set commands have 8 bit parameters except for the write_memory commands where it depends on the pixel format. drm_mipi_dbi does currently only support RGB565 which is 16-bit and it has to make sure that the pixels enters the SPI bus in big endian format since the MIPI DBI spec doesn't have support for little endian. drm_mipi_dbi is optimized for DBI interface option 3 which means that the 16-bit bytes are swapped by the upper layer if the SPI bus does not support 16 bits per word, signified by the swap_bytes member. In order to support both 16-bit and 24-bit pixel transfers we need a way to tell the DBI command layer the format of the buffer. Add a write_memory_bpw member that the upper layer can use to tell how many bits per word to use for the SPI transfer. v4: - Expand the commit message (Dmitry) Signed-off-by: Noralf Trønnes <noralf@xxxxxxxxxxx> --- drivers/gpu/drm/drm_mipi_dbi.c | 14 ++++++++++---- include/drm/drm_mipi_dbi.h | 5 +++++ 2 files changed, 15 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/drm_mipi_dbi.c b/drivers/gpu/drm/drm_mipi_dbi.c index fa8aba6dc81c..77f8a828d6e0 100644 --- a/drivers/gpu/drm/drm_mipi_dbi.c +++ b/drivers/gpu/drm/drm_mipi_dbi.c @@ -1079,7 +1079,7 @@ static int mipi_dbi_typec1_command_read(struct mipi_dbi *dbi, u8 *cmd, static int mipi_dbi_typec1_command(struct mipi_dbi *dbi, u8 *cmd, u8 *parameters, size_t num) { - unsigned int bpw = (*cmd == MIPI_DCS_WRITE_MEMORY_START) ? 16 : 8; + unsigned int bpw = 8; int ret; if (mipi_dbi_command_is_read(dbi, *cmd)) @@ -1091,6 +1091,9 @@ static int mipi_dbi_typec1_command(struct mipi_dbi *dbi, u8 *cmd, if (ret || !num) return ret; + if (*cmd == MIPI_DCS_WRITE_MEMORY_START) + bpw = dbi->write_memory_bpw; + return mipi_dbi_spi1_transfer(dbi, 1, parameters, num, bpw); } @@ -1184,8 +1187,8 @@ static int mipi_dbi_typec3_command(struct mipi_dbi *dbi, u8 *cmd, if (ret || !num) return ret; - if (*cmd == MIPI_DCS_WRITE_MEMORY_START && !dbi->swap_bytes) - bpw = 16; + if (*cmd == MIPI_DCS_WRITE_MEMORY_START) + bpw = dbi->write_memory_bpw; spi_bus_lock(spi->controller); gpiod_set_value_cansleep(dbi->dc, 1); @@ -1256,12 +1259,15 @@ int mipi_dbi_spi_init(struct spi_device *spi, struct mipi_dbi *dbi, dbi->spi = spi; dbi->read_commands = mipi_dbi_dcs_read_commands; + dbi->write_memory_bpw = 16; if (dc) { dbi->command = mipi_dbi_typec3_command; dbi->dc = dc; - if (!spi_is_bpw_supported(spi, 16)) + if (!spi_is_bpw_supported(spi, 16)) { + dbi->write_memory_bpw = 8; dbi->swap_bytes = true; + } } else { dbi->command = mipi_dbi_typec1_command; dbi->tx_buf9_len = SZ_16K; diff --git a/include/drm/drm_mipi_dbi.h b/include/drm/drm_mipi_dbi.h index e8e0f8d39f3a..b36596efdcc3 100644 --- a/include/drm/drm_mipi_dbi.h +++ b/include/drm/drm_mipi_dbi.h @@ -56,6 +56,11 @@ struct mipi_dbi { */ struct spi_device *spi; + /** + * @write_memory_bpw: Bits per word used on a MIPI_DCS_WRITE_MEMORY_START transfer + */ + unsigned int write_memory_bpw; + /** * @dc: Optional D/C gpio. */ -- 2.45.1