On Tue, May 21, 2024 at 02:25:59PM +0800, Peng Fan (OSS) wrote: > From: Peng Fan <peng.fan@xxxxxxx> > > The generic pinctrl-scmi.c driver could not be used for i.MX95 because > i.MX95 SCMI firmware not supports functions, groups or generic > 'Pin Configuration Type and Enumerations' listed in SCMI Specification. > > i.MX95 System Control Management Interface(SCMI) firmware only supports > below pin configuration types which are OEM specific types: > 192: PIN MUX > 193: PIN CONF > 194: DAISY ID > 195: DAISY VAL > > To Support fsl,pins property together with SCMI OEM protocol, add this > driver. > > Signed-off-by: Peng Fan <peng.fan@xxxxxxx> > --- > drivers/pinctrl/freescale/Kconfig | 9 + > drivers/pinctrl/freescale/Makefile | 1 + > drivers/pinctrl/freescale/pinctrl-imx-scmi.c | 357 +++++++++++++++++++++++++++ > 3 files changed, 367 insertions(+) > Only tested compilation and interactions with Generic Pinctrl SCMI driver, LGTM. Reviewed-by: Cristian Marussi <cristian.marussi@xxxxxxx> Thanks, Cristian
