Quoting Alvin Šipraga (2024-05-17 06:02:15)
> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index 3e9099504fad..a3d54b077e68 100644
> --- a/drivers/clk/Kconfig
> +++ b/drivers/clk/Kconfig
> @@ -257,6 +257,13 @@ config COMMON_CLK_LAN966X
> LAN966X SoC. GCK generates and supplies clock to various peripherals
> within the SoC.
>
> +config COMMON_CLK_AD24XX
> + bool "Clock driver for Analog Devices Inc. AD24xx"
tristate
> + depends on A2B_AD24XX_NODE
Please make it be COMPILE_TESTed as well?
> + help
> + This driver supports the clock output functionality of AD24xx series
> + A2B transceiver chips.
> +
> config COMMON_CLK_ASPEED
> bool "Clock driver for Aspeed BMC SoCs"
> depends on ARCH_ASPEED || COMPILE_TEST
> diff --git a/drivers/clk/clk-ad24xx.c b/drivers/clk/clk-ad24xx.c
> new file mode 100644
> index 000000000000..ed227c317faa
> --- /dev/null
> +++ b/drivers/clk/clk-ad24xx.c
> @@ -0,0 +1,341 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * AD24xx clock driver
> + *
> + * Copyright (c) 2023 Alvin Šipraga <alsi@xxxxxxxxxxxxxxx>
> + */
> +
> +#include <linux/a2b/a2b.h>
> +#include <linux/a2b/ad24xx.h>
> +#include <linux/clk-provider.h>
> +#include <linux/module.h>
> +#include <linux/regmap.h>
Include header for static_assert() at least. There's probably more that
are needed, please check.
> +
> +#define AD24XX_NUM_CLKS 2
> +
> +/* Define some safe macros to make the code more readable */
> +#define A2B_CLKCFG(_idx) (!(_idx) ? A2B_CLK1CFG : A2B_CLK2CFG)
> +
> +#define A2B_CLKCFG_DIV_SHIFT A2B_CLK1CFG_CLK1DIV_SHIFT
> +#define A2B_CLKCFG_PDIV_SHIFT A2B_CLK1CFG_CLK1PDIV_SHIFT
> +
> +#define A2B_CLKCFG_DIV_MASK A2B_CLK1CFG_CLK1DIV_MASK
> +#define A2B_CLKCFG_PDIV_MASK A2B_CLK1CFG_CLK1PDIV_MASK
> +#define A2B_CLKCFG_INV_MASK A2B_CLK1CFG_CLK1INV_MASK
> +#define A2B_CLKCFG_EN_MASK A2B_CLK1CFG_CLK1EN_MASK
> +
> +static_assert(A2B_CLK1CFG_CLK1DIV_MASK == A2B_CLK2CFG_CLK2DIV_MASK);
> +static_assert(A2B_CLK1CFG_CLK1PDIV_MASK == A2B_CLK2CFG_CLK2PDIV_MASK);
> +static_assert(A2B_CLK1CFG_CLK1INV_MASK == A2B_CLK2CFG_CLK2INV_MASK);
> +static_assert(A2B_CLK1CFG_CLK1EN_MASK == A2B_CLK2CFG_CLK2EN_MASK);
> +
> +struct ad24xx_clkout {
> + struct clk_hw hw;
> + unsigned int idx;
> + bool registered;
> +};
> +
> +struct ad24xx_clk {
> + struct device *dev;
Is this used?
> + struct a2b_func *func;
Is this used?
> + struct a2b_node *node;
Is this used?
> + struct regmap *regmap;
> + struct clk_hw *pll_hw;
Is this used outside of probe?
> + struct ad24xx_clkout clkouts[AD24XX_NUM_CLKS];
> +};
> +
[..]
> +
> +static const struct regmap_config ad24xx_clk_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .cache_type = REGCACHE_RBTREE,
No max_register?
> +};
> +
> +static struct clk_hw *ad24xx_clk_of_get(struct of_phandle_args *clkspec, void *data)
> +{
> + struct ad24xx_clk *adclk = data;
> + unsigned int idx = clkspec->args[0];
> +
> + if (idx >= AD24XX_NUM_CLKS)
> + return ERR_PTR(-EINVAL);
> +
> + if (!adclk->clkouts[idx].registered)
> + return ERR_PTR(-ENOENT);
> +
> + return &adclk->clkouts[idx].hw;
> +}
> +
> +static int ad24xx_clk_probe(struct device *dev)
> +{
> + struct a2b_func *func = to_a2b_func(dev);
> + struct a2b_node *node = func->node;
> + struct device_node *np = dev->of_node;
> + char *pll_name;
> + const char *sync_clk_name;
> + struct ad24xx_clk *adclk;
> + int num_clks;
> + int ret;
> + int i;
> +
> + /*
> + * Older series AD240x and AD241x chips have a single discrete
> + * A2B_CLKCFG register that behaves differently to the A2B_CLKnCFG
> + * registers of the later AD242x series. This driver only supports the
> + * latter right now.
> + */
> + if (!(node->chip_info->caps & A2B_CHIP_CAP_CLKOUT))
> + return -ENODEV;
Maybe print a warning message to make it more obvious.
> +
> + adclk = devm_kzalloc(dev, sizeof(*adclk), GFP_KERNEL);
> + if (!adclk)
> + return -ENOMEM;
> +
> + adclk->regmap =
> + devm_regmap_init_a2b_func(func, &ad24xx_clk_regmap_config);
Put it on one line please .
> + if (IS_ERR(adclk->regmap))
> + return PTR_ERR(adclk->regmap);
> +
> + adclk->dev = dev;
> + adclk->func = func;
> + adclk->node = node;
> + dev_set_drvdata(dev, adclk);
> +
> + num_clks = of_property_count_strings(np, "clock-output-names");
> + if (num_clks < 0 || num_clks > AD24XX_NUM_CLKS)
> + return -EINVAL;
Please register all the clks provided by this chip.
> +
> + /*
> + * Register the PLL internally to use it as the parent of the CLKOUTs.
> + * The PLL runs at 2048 times the SYNC clock rate.
> + */
> + pll_name =
> + devm_kasprintf(dev, GFP_KERNEL, "%s_pll", dev_name(&node->dev));
> + if (!pll_name)
> + return -ENOMEM;
> + sync_clk_name = __clk_get_name(a2b_node_get_sync_clk(func->node));
> + adclk->pll_hw = devm_clk_hw_register_fixed_factor(
> + dev, pll_name, sync_clk_name, 0, 2048, 1);
I think this should be devm_clk_hw_register_fixed_factor_fwname().
> + if (IS_ERR(adclk->pll_hw))
> + return PTR_ERR(adclk->pll_hw);
> +
> + for (i = 0; i < num_clks; i++) {
> + struct clk_init_data init = { };
> + const char *parent_names = clk_hw_get_name(adclk->pll_hw);
Please use struct clk_parent_data instead of strings to describe
topology.
> + unsigned int idx = i;
> +
> + /* Clock outputs can be skipped with the clock-indices property */
> + of_property_read_u32_index(np, "clock-indices", i, &idx);
> + if (idx > AD24XX_NUM_CLKS)
> + return -EINVAL;
> +
> + ret = of_property_read_string_index(np, "clock-output-names", i,
> + &init.name);
The name should only be for debug purposes. Please don't use
clock-output-names DT property. If you need to make it unique perhaps
you can add in the device name or something like that?
> + if (ret)
> + return ret;
> +
> + init.ops = &ad24xx_clk_ops;
> + init.parent_names = &parent_names;
> + init.num_parents = 1;
> +
> + adclk->clkouts[idx].hw.init = &init;
> + adclk->clkouts[idx].idx = idx;
> + adclk->clkouts[idx].registered = true;
> +
> + ret = devm_clk_hw_register(dev, &adclk->clkouts[idx].hw);
> + if (ret)
> + return ret;
> + }
> +
> + ret = devm_of_clk_add_hw_provider(dev, ad24xx_clk_of_get, adclk);
> + if (ret)
> + return ret;
> +
> + return 0;
Please just return devm_of_clk_add_hw_provider(...) to prevent the
cleanup crews from sending a followup patch.
> +}
> +
> +static const struct of_device_id ad24xx_clk_of_match_table[] = {
> + { .compatible = "adi,ad2420-clk" },
> + { .compatible = "adi,ad2421-clk" },
> + { .compatible = "adi,ad2422-clk" },
> + { .compatible = "adi,ad2425-clk" },
> + { .compatible = "adi,ad2426-clk" },
> + { .compatible = "adi,ad2427-clk" },
> + { .compatible = "adi,ad2428-clk" },
> + { .compatible = "adi,ad2429-clk" },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, ad24xx_clk_of_match_table);
> +
> +static struct a2b_driver ad24xx_clk_driver = {
I guess because this isn't a platform driver I can't merge this through
the clk tree? Is there any difference from the platform bus?
> + .driver = {
> + .name = "ad24xx-clk",
> + .of_match_table = ad24xx_clk_of_match_table,
> + .probe_type = PROBE_PREFER_ASYNCHRONOUS,
> + },
> + .probe = ad24xx_clk_probe,
> +};
> +module_a2b_driver(ad24xx_clk_driver);
