On Feb 23, 2015, at 1:54 AM, Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx> wrote:
> This patch adds rpm node to apq8064 dt as rpm would be used by other
> devices for regulator support. Also adds all the regulators in the rpm.
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
> ---
> arch/arm/boot/dts/qcom-apq8064.dtsi | 241 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 241 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
> index b3154c0..db5fc59 100644
> --- a/arch/arm/boot/dts/qcom-apq8064.dtsi
> +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
> @@ -3,6 +3,7 @@
> #include "skeleton.dtsi"
> #include <dt-bindings/clock/qcom,gcc-msm8960.h>
> #include <dt-bindings/clock/qcom,mmcc-msm8960.h>
> +#include <dt-bindings/mfd/qcom-rpm.h>
> #include <dt-bindings/soc/qcom,gsbi.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
>
> @@ -246,6 +247,246 @@
> #reset-cells = <1>;
> };
>
> + l2cc: clock-controller@2011000 {
> + compatible = "syscon";
> + reg = <0x2011000 0x1000>;
> + };
> +
> + rpm@108000 {
> + compatible = "qcom,rpm-apq8064";
> + reg = <0x108000 0x1000>;
> + qcom,ipc = <&l2cc 0x8 2>;
> +
> + interrupts = <0 19 0>, <0 21 0>, <0 22 0>;
> + interrupt-names = "ack", "err", "wakeup";
> +
Can you use the defines for GIC for the interrupts. Also, I think the last property should probably be level high instead of 0.
- k
--
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
