Add ROHM BH1745 - 4 channel I2C colour sensor's dt-bindings. Signed-off-by: Mudit Sharma <muditsharma.info@xxxxxxxxx> --- .../bindings/iio/light/rohm,bh1745.yaml | 49 +++++++++++++++++++ 1 file changed, 49 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/light/rohm,bh1745.yaml diff --git a/Documentation/devicetree/bindings/iio/light/rohm,bh1745.yaml b/Documentation/devicetree/bindings/iio/light/rohm,bh1745.yaml new file mode 100644 index 000000000000..b6abfbf609cb --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/rohm,bh1745.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/rohm,bh1745.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BH1745 colour sensor + +maintainers: + Mudit Sharma <muditsharma.info@xxxxxxxxx> + +description: | + BH1745 is an I2C colour sensor with red, green, blue and clear + channels. It has a programmable active low interrupt pin. + Interrupt occurs when the signal from the selected interrupt + source channel crosses set interrupt threshold high/low level. + +properties: + compatible: + const: rohm,bh1745 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + colour-sensor@38 { + compatible = "rohm,bh1745"; + reg = <0x38>; + interrupt-parent = <&gpio>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + }; + }; + +... -- 2.43.0
