STM32MP13 is STM32 SOC with 2 GMACs instances
GMAC IP version is SNPS 4.20.
GMAC IP configure with 1 RX and 1 TX queue.
DMA HW capability register supported
RX Checksum Offload Engine supported
TX Checksum insertion supported
Wake-Up On Lan supported
TSO supported
Rework dwmac glue to simplify management for next stm32 (integrate RFC from Marek)
V2: - Remark from Rob Herring (add Krzysztof's ack in patch 02/11, update in yaml)
Remark from Serge Semin (upate commits msg)
V3: - Remove PHY regulator patch and Ethernet2 DT because need to clarify how to
manage PHY regulator (in glue or PHY side)
- Integrate RFC from Marek
- Remark from Rob Herring in YAML documentation
Christophe Roullier (6):
dt-bindings: net: add STM32MP13 compatible in documentation for stm32
net: ethernet: stmmac: add management of stm32mp13 for stm32
ARM: dts: stm32: add ethernet1 and ethernet2 support on stm32mp13
ARM: dts: stm32: add ethernet1/2 RMII pins for STM32MP13F-DK board
ARM: dts: stm32: add ethernet1 for STM32MP135F-DK board
ARM: multi_v7_defconfig: Add MCP23S08 pinctrl support
Marek Vasut (5):
net: stmmac: dwmac-stm32: Separate out external clock rate validation
net: stmmac: dwmac-stm32: Separate out external clock selector
net: stmmac: dwmac-stm32: Extract PMCR configuration
net: stmmac: dwmac-stm32: Clean up the debug prints
net: stmmac: dwmac-stm32: Fix Mhz to MHz
.../devicetree/bindings/net/stm32-dwmac.yaml | 41 +++-
arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi | 71 +++++++
arch/arm/boot/dts/st/stm32mp131.dtsi | 31 +++
arch/arm/boot/dts/st/stm32mp133.dtsi | 30 +++
arch/arm/boot/dts/st/stm32mp135f-dk.dts | 24 +++
arch/arm/configs/multi_v7_defconfig | 1 +
.../net/ethernet/stmicro/stmmac/dwmac-stm32.c | 176 ++++++++++++++----
7 files changed, 327 insertions(+), 47 deletions(-)
--
2.25.1
