Recently the DW XPCS DT-bindings have been introduced and the DW XPCS
driver has been altered to support the DW XPCS registered as a platform
device. In order to have the DW XPCS DT-device accessed from the STMMAC
driver let's alter the STMMAC PCS-setup procedure to support the
"pcs-handle" property containing the phandle reference to the DW XPCS
device DT-node. The respective fwnode will be then passed to the
xpcs_create_fwnode() function which in its turn will create the DW XPCS
descriptor utilized in the main driver for the PCS-related setups.
Signed-off-by: Serge Semin <fancer.lancer@xxxxxxxxx>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index 807789d7309a..dc040051aa53 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -497,15 +497,22 @@ int stmmac_mdio_reset(struct mii_bus *bus)
int stmmac_pcs_setup(struct net_device *ndev)
{
+ struct fwnode_handle *devnode, *pcsnode;
struct dw_xpcs *xpcs = NULL;
struct stmmac_priv *priv;
int addr, mode, ret;
priv = netdev_priv(ndev);
mode = priv->plat->phy_interface;
+ devnode = priv->plat->port_node;
if (priv->plat->pcs_init) {
ret = priv->plat->pcs_init(priv);
+ } else if (fwnode_property_present(devnode, "pcs-handle")) {
+ pcsnode = fwnode_find_reference(devnode, "pcs-handle", 0);
+ xpcs = xpcs_create_fwnode(pcsnode, mode);
+ fwnode_handle_put(pcsnode);
+ ret = PTR_ERR_OR_ZERO(xpcs);
} else if (priv->plat->mdio_bus_data &&
priv->plat->mdio_bus_data->has_xpcs) {
addr = priv->plat->mdio_bus_data->xpcs_addr;
@@ -515,10 +522,8 @@ int stmmac_pcs_setup(struct net_device *ndev)
return 0;
}
- if (ret) {
- dev_warn(priv->device, "No xPCS found\n");
- return ret;
- }
+ if (ret)
+ return dev_err_probe(priv->device, ret, "No xPCS found\n");
priv->hw->xpcs = xpcs;
--
2.43.0
