[PATCH v6 2/5] soc: qcom: llcc: Add regmap for Broadcast_AND region

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Until SM8450, there was only one broadcast region (Broadcast_OR)
used to broadcast write and check for status bit 0.
>From SM8450 onwards another broadcast region (Broadcast_AND) has been
added which checks for status bit 1. This hasn't been updated and
Broadcast_OR region was wrongly being used to check for status bit 1 all
along.

Hence define new regmap structure for Broadcast_AND region and initialize
this regmap when HW block version is greater than 4.1, otherwise
initialize as a NULL pointer for backwards compatibility.
Switch from broadcast_OR to broadcast_AND region (when defined in DT)
for checking status bit 1 as Broadcast_OR region checks only for bit 0.

Signed-off-by: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx>
Reviewed-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
---
 drivers/soc/qcom/llcc-qcom.c       | 16 +++++++++++++++-
 include/linux/soc/qcom/llcc-qcom.h |  4 +++-
 2 files changed, 18 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c
index cbef0dea1d5d..668e0cb6a925 100644
--- a/drivers/soc/qcom/llcc-qcom.c
+++ b/drivers/soc/qcom/llcc-qcom.c
@@ -821,6 +821,7 @@ EXPORT_SYMBOL_GPL(llcc_slice_putd);
 static int llcc_update_act_ctrl(u32 sid,
 				u32 act_ctrl_reg_val, u32 status)
 {
+	struct regmap *regmap;
 	u32 act_ctrl_reg;
 	u32 act_clear_reg;
 	u32 status_reg;
@@ -849,7 +850,8 @@ static int llcc_update_act_ctrl(u32 sid,
 		return ret;
 
 	if (drv_data->version >= LLCC_VERSION_4_1_0_0) {
-		ret = regmap_read_poll_timeout(drv_data->bcast_regmap, status_reg,
+		regmap = drv_data->bcast_and_regmap ?: drv_data->bcast_regmap;
+		ret = regmap_read_poll_timeout(regmap, status_reg,
 				      slice_status, (slice_status & ACT_COMPLETE),
 				      0, LLCC_STATUS_READ_DELAY);
 		if (ret)
@@ -1284,6 +1286,18 @@ static int qcom_llcc_probe(struct platform_device *pdev)
 
 	drv_data->version = version;
 
+	/* Applicable only when drv_data->version >= 4.1 */
+	if (drv_data->version >= LLCC_VERSION_4_1_0_0) {
+		drv_data->bcast_and_regmap = qcom_llcc_init_mmio(pdev, i + 1, "llcc_broadcast_and_base");
+		if (IS_ERR(drv_data->bcast_and_regmap)) {
+			ret = PTR_ERR(drv_data->bcast_and_regmap);
+			if (ret == -EINVAL)
+				drv_data->bcast_and_regmap = NULL;
+			else
+				goto err;
+		}
+	}
+
 	llcc_cfg = cfg->sct_data;
 	sz = cfg->size;
 
diff --git a/include/linux/soc/qcom/llcc-qcom.h b/include/linux/soc/qcom/llcc-qcom.h
index 1a886666bbb6..9e9f528b1370 100644
--- a/include/linux/soc/qcom/llcc-qcom.h
+++ b/include/linux/soc/qcom/llcc-qcom.h
@@ -115,7 +115,8 @@ struct llcc_edac_reg_offset {
 /**
  * struct llcc_drv_data - Data associated with the llcc driver
  * @regmaps: regmaps associated with the llcc device
- * @bcast_regmap: regmap associated with llcc broadcast offset
+ * @bcast_regmap: regmap associated with llcc broadcast OR offset
+ * @bcast_and_regmap: regmap associated with llcc broadcast AND offset
  * @cfg: pointer to the data structure for slice configuration
  * @edac_reg_offset: Offset of the LLCC EDAC registers
  * @lock: mutex associated with each slice
@@ -129,6 +130,7 @@ struct llcc_edac_reg_offset {
 struct llcc_drv_data {
 	struct regmap **regmaps;
 	struct regmap *bcast_regmap;
+	struct regmap *bcast_and_regmap;
 	const struct llcc_slice_config *cfg;
 	const struct llcc_edac_reg_offset *edac_reg_offset;
 	struct mutex lock;
-- 
2.34.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux