From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
pm_runtime_get_sync() may return with error. In case it returns with error
dev->power.usage_count needs to be decremented. pm_runtime_resume_and_get()
takes care of this. Thus use it.
Along with it the rzg2l_wdt_set_timeout() function was updated to
propagate the result of rzg2l_wdt_start() to its caller.
Fixes: 2cbc5cd0b55f ("watchdog: Add Watchdog Timer driver for RZ/G2L")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
Changes in v9:
- collected Guenter's Rb tag
Changes in v8:
- none
Changes in v7:
- none
Changes in v6:
- none
Changes in v5:
- none
Changes in v4:
- none
Changes in v3:
- none
Changes in v2:
- propagate the return code of rzg2l_wdt_start() to it's callers
drivers/watchdog/rzg2l_wdt.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/watchdog/rzg2l_wdt.c b/drivers/watchdog/rzg2l_wdt.c
index 1741f98ca67c..d87d4f50180c 100644
--- a/drivers/watchdog/rzg2l_wdt.c
+++ b/drivers/watchdog/rzg2l_wdt.c
@@ -123,8 +123,11 @@ static void rzg2l_wdt_init_timeout(struct watchdog_device *wdev)
static int rzg2l_wdt_start(struct watchdog_device *wdev)
{
struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
+ int ret;
- pm_runtime_get_sync(wdev->parent);
+ ret = pm_runtime_resume_and_get(wdev->parent);
+ if (ret)
+ return ret;
/* Initialize time out */
rzg2l_wdt_init_timeout(wdev);
@@ -150,6 +153,8 @@ static int rzg2l_wdt_stop(struct watchdog_device *wdev)
static int rzg2l_wdt_set_timeout(struct watchdog_device *wdev, unsigned int timeout)
{
+ int ret = 0;
+
wdev->timeout = timeout;
/*
@@ -159,10 +164,10 @@ static int rzg2l_wdt_set_timeout(struct watchdog_device *wdev, unsigned int time
*/
if (watchdog_active(wdev)) {
rzg2l_wdt_stop(wdev);
- rzg2l_wdt_start(wdev);
+ ret = rzg2l_wdt_start(wdev);
}
- return 0;
+ return ret;
}
static int rzg2l_wdt_restart(struct watchdog_device *wdev,
--
2.39.2
