The 1.2v HS PHY shared regulator is actually LDO2 from PM8550ve id J. Also add the missing supplies to QMP PHYs. Fixes: d7e03cce0400 ("arm64: dts: qcom: x1e80100-crd: Enable more support") Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx> --- arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts index ed8b80627534..173a88b6b8b8 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts @@ -841,7 +841,7 @@ &uart21 { &usb_1_ss0_hsphy { vdd-supply = <&vreg_l2e_0p8>; - vdda12-supply = <&vreg_l3e_1p2>; + vdda12-supply = <&vreg_l2j_1p2>; phys = <&smb2360_0_eusb2_repeater>; @@ -849,6 +849,9 @@ &usb_1_ss0_hsphy { }; &usb_1_ss0_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l1j_0p8>; + status = "okay"; }; @@ -862,7 +865,7 @@ &usb_1_ss0_dwc3 { &usb_1_ss1_hsphy { vdd-supply = <&vreg_l2e_0p8>; - vdda12-supply = <&vreg_l3e_1p2>; + vdda12-supply = <&vreg_l2j_1p2>; phys = <&smb2360_1_eusb2_repeater>; @@ -870,6 +873,9 @@ &usb_1_ss1_hsphy { }; &usb_1_ss1_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + status = "okay"; }; @@ -883,7 +889,7 @@ &usb_1_ss1_dwc3 { &usb_1_ss2_hsphy { vdd-supply = <&vreg_l2e_0p8>; - vdda12-supply = <&vreg_l3e_1p2>; + vdda12-supply = <&vreg_l2j_1p2>; phys = <&smb2360_2_eusb2_repeater>; @@ -891,6 +897,9 @@ &usb_1_ss2_hsphy { }; &usb_1_ss2_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + status = "okay"; }; -- 2.34.1