This patch series adds support for the second version of the Marvell hardware overlay for the Cadence xSPI IP block. The overlay is a hardware change made around the original xSPI block. It extends xSPI features with clock configuration, interrupt masking, and full-duplex, variable-length SPI operations. These functionalities allow the xSPI block to operate not only with memory devices but also with simple SPI devices and TPM devices. Changes: v6: Fix item order in cdns,xspi.yaml v5: Rework cdns,xspi.yaml file Reword commit messages Move mamory mapping to ACPI patch Use devm_platform_ioremap_resource instead of two step mapping v4: Rename new Marvell registers to keep naming conventions Rename mrvl,xspi-nor to marvell,cnxx,xspi-nor Various fixed for cdns,xspi.yaml file: - Remove unnecesary parameters - Link register xferbase with marvell,cn10-xspi-nor - Move default values to .c file from device-tree Clock configuration optimization ACPI fixes: - Remove incorrect ACPI match table Added .data field to device_id, fixes for matching in ACPI and dtb case Minor style comment changes v3: Removed all kconfig changes Added device-tree mrvl,xspi-nor tag v2: Support for second overlay iteration v1: - v0: Initial support for v1 overlay Piyush Malgujar (1): spi: cadence: Allow to read basic xSPI configuration from ACPI Witold Sadowski (4): spi: cadence: Ensure data lines set to low during dummy-cycle period spi: dt-bindings: cadence: Add Marvell overlay bindings documentation for Cadence XSPI spi: cadence: Add Marvell xSPI IP overlay changes spi: cadence: Add MRVL overlay xfer operation support .../devicetree/bindings/spi/cdns,xspi.yaml | 32 +- drivers/spi/spi-cadence-xspi.c | 620 +++++++++++++++++- 2 files changed, 628 insertions(+), 24 deletions(-) -- 2.43.0