On Tue, 28 May 2024 18:18:45 -0300, Fabio Estevam wrote: > From: Fabio Estevam <festevam@xxxxxxx> > > Document Compulab's IOT-GATE-iMX8 board, which is based on Compulab's > UCM-iMX8M-Mini SoM. > > Board URL: > https://www.compulab.com/products/iot-gateways/iot-gate-imx8-industrial-arm-iot-gateway/ > > SoM URL: > https://www.compulab.com/products/computer-on-modules/ucm-imx8m-mini-nxp-i-mx-8m-mini-som-system-on-module-computer/ > > Signed-off-by: Fabio Estevam <festevam@xxxxxxx> > --- > Documentation/devicetree/bindings/arm/fsl.yaml | 7 +++++++ > 1 file changed, 7 insertions(+) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: ./Documentation/devicetree/bindings/arm/fsl.yaml:944:45: [error] syntax error: found character '\t' that cannot start any token (syntax) dtschema/dtc warnings/errors: doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240528211846.1403524-1-festevam@xxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
