On Fri, May 24, 2024 at 04:31:48PM +0200, Alexandre Bailon wrote: > This adds a new property named "aggregation" that could be used to > select the aggregation type when there are multiple sensors assigned > to a thermal zone. > > Signed-off-by: Alexandre Bailon <abailon@xxxxxxxxxxxx> > --- > .../devicetree/bindings/thermal/thermal-zones.yaml | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml > index fa7a72e2ba44..e6e4b46773e3 100644 > --- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml > +++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml > @@ -111,6 +111,14 @@ patternProperties: > coefficients are ordered and are matched with sensors by means of the > sensor ID. Additional coefficients are interpreted as constant offset. > > + aggregation: > + $ref: /schemas/types.yaml#/definitions/string > + enum: > + - avg > + - max > + description: > + Aggregation type to use compute a temperature from multiple sensors. This is optional, so what's the default? I suppose you could make it required if more than 1 sensor. A boolean could work here as well unless you think there might be a 3rd algorithm. > + > sustainable-power: > $ref: /schemas/types.yaml#/definitions/uint32 > description: > -- > 2.44.1 >
