On Tue, May 28, 2024 at 05:12:54PM +0530, Ajit Pandey wrote:
> Add device node for camera, display and graphics clock controller on
> Qualcomm SM4450 platform.
>
> Signed-off-by: Ajit Pandey <quic_ajipan@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sm4450.dtsi | 38 ++++++++++++++++++++++++++++
> 1 file changed, 38 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm4450.dtsi b/arch/arm64/boot/dts/qcom/sm4450.dtsi
> index 8d75c4f9731c..ef448e13b8a0 100644
> --- a/arch/arm64/boot/dts/qcom/sm4450.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm4450.dtsi
> @@ -4,7 +4,10 @@
> */
>
> #include <dt-bindings/clock/qcom,rpmh.h>
> +#include <dt-bindings/clock/qcom,sm4450-camcc.h>
> +#include <dt-bindings/clock/qcom,sm4450-dispcc.h>
> #include <dt-bindings/clock/qcom,sm4450-gcc.h>
> +#include <dt-bindings/clock/qcom,sm4450-gpucc.h>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> #include <dt-bindings/soc/qcom,rpmh-rsc.h>
> @@ -388,6 +391,41 @@ gcc: clock-controller@100000 {
> <0>;
> };
>
> + gpucc: clock-controller@3d90000 {
> + compatible = "qcom,sm4450-gpucc";
> + reg = <0 0x3d90000 0 0xa000>;
> + clocks = <&rpmhcc RPMH_CXO_CLK>,
> + <&gcc GCC_GPU_GPLL0_CLK_SRC>,
> + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + #power-domain-cells = <1>;
> + };
> +
> + camcc: clock-controller@ade0000 {
> + compatible = "qcom,sm4450-camcc";
> + reg = <0x0 0xade0000 0x0 0x20000>;
> + clocks = <&rpmhcc RPMH_CXO_CLK>,
> + <&gcc GCC_CAMERA_AHB_CLK>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + #power-domain-cells = <1>;
> + };
Please keep all the nodes sorted using the device address.
> +
> + dispcc: clock-controller@af00000 {
> + compatible = "qcom,sm4450-dispcc";
> + reg = <0 0x0af00000 0 0x20000>;
> + clocks = <&rpmhcc RPMH_CXO_CLK>,
> + <&rpmhcc RPMH_CXO_CLK_A>,
> + <&gcc GCC_DISP_AHB_CLK>,
> + <&sleep_clk>,
> + <0>,
> + <0>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + #power-domain-cells = <1>;
> + };
> +
> qupv3_id_0: geniqup@ac0000 {
> compatible = "qcom,geni-se-qup";
> reg = <0x0 0x00ac0000 0x0 0x2000>;
> --
> 2.25.1
>
--
With best wishes
Dmitry
