On 28/05/24 3:09 pm, Bhavya Kapoor wrote:
main_uart5 node defined in the SoC dtsi file is incomplete and will not be functional unless it is extended with pinmux information at board integration level. Thus, add pinmux for main_uart5 in the board dts file and enable it to make it functional. Signed-off-by: Bhavya Kapoor <b-kapoor@xxxxxx> ---
rebased to next-20240528
arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts index bf3c246d13d1..e3892a6f2fab 100644 --- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts @@ -18,6 +18,7 @@ / { aliases { serial0 = &wkup_uart0; serial2 = &main_uart0; + serial3 = &main_uart5; mmc0 = &sdhci0; mmc1 = &sdhci1; }; @@ -142,6 +143,14 @@ J722S_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (B22) UART0_TXD */ bootph-all; };+ main_uart5_pins_default: main-uart5-default-pins {+ pinctrl-single,pins = < + J722S_IOPAD(0x0108, PIN_INPUT, 3) /* (J27) UART5_RXD */ + J722S_IOPAD(0x010c, PIN_OUTPUT, 3) /* (H27) UART5_TXD */ + >; + bootph-all; + }; + vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { pinctrl-single,pins = < J722S_IOPAD(0x0120, PIN_INPUT, 7) /* (F27) MMC2_CMD.GPIO0_70 */ @@ -240,6 +249,13 @@ &main_uart0 { bootph-all; };+&main_uart5 {+ pinctrl-names = "default"; + pinctrl-0 = <&main_uart5_pins_default>; + status = "okay"; + bootph-all; +}; + &mcu_pmx0 {wkup_uart0_pins_default: wkup-uart0-default-pins {
