Re: [PATCH 2/2] arm64: dts: rockchip: Add CM3588 NAS board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am Montag, 27. Mai 2024, 21:02:02 CEST schrieb Jonas Karlman:
> Hi Sebastian,
> 
> On 2024-05-26 23:48, Sebastian Kropatsch wrote:
> > The CM3588 NAS by FriendlyElec pairs the CM3588 compute module, based on
> > the Rockchip RK3588 SoC, with the CM3588 NAS Kit carrier board.
> > 
> > Hardware features:
> >     - Rockchip RK3588 SoC
> >     - 4GB/8GB/16GB LPDDR4x RAM
> >     - 64GB eMMC
> >     - MicroSD card slot
> >     - 1x RTL8125B 2.5G Ethernet
> >     - 4x M.2 M-Key with PCIe 3.0 x1 (via bifurcation) for NVMe SSDs
> >     - 2x USB 3.0 (USB 3.1 Gen1) Type-A, 1x USB 2.0 Type-A
> >     - 1x USB 3.0 Type-C with DP AltMode support
> >     - 2x HDMI 2.1 out, 1x HDMI in
> >     - MIPI-CSI Connector, MIPI-DSI Connector
> >     - 40-pin GPIO header
> >     - 4 buttons: power, reset, recovery, MASK, user button
> >     - 3.5mm Headphone out, 2.0mm PH-2A Mic in
> >     - 5V Fan connector, PWM buzzer, IR receiver, RTC battery connector
> > 
> > PCIe bifurcation is used to handle all four M.2 sockets at PCIe 3.0 x1
> > speed. Data lane mapping in the DT is done like described in commit
> > f8020dfb311d ("phy: rockchip-snps-pcie3: fix bifurcation on rk3588").
> > 
> > This device tree includes support for eMMC, SD card, ethernet, all USB2
> > and USB3 ports, all four M.2 slots, GPU, RTC, buzzer, UART debugging as
> > well as the buttons and LEDs.
> > The GPIOs are labeled according to the schematics.
> > 
> > Signed-off-by: Sebastian Kropatsch <seb-dev@xxxxxx>
> > ---
> >  arch/arm64/boot/dts/rockchip/Makefile         |    1 +
> >  .../boot/dts/rockchip/rk3588-cm3588-nas.dts   | 1269 +++++++++++++++++
> >  2 files changed, 1270 insertions(+)
> >  create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-cm3588-nas.dts
> 
> Because the CM3588 is a SoM and the NAS is a carrier board this should
> probably be split in two, cm3588.dtsi and cm3588-nas.dts.

also, because of that way too generic name "cm", please incorporate the
company name in the filename as well. For the same reason we named
the rk3568-wolfvision-pf5.dts that way ;-) [Wolfvision being the company]

So maybe:
rk3588-friendlyelec-cm3588.dtsi and rk3588-friendlyelec-cm3588-nas.dts

 
> > diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> > index c544ff507d20..f1ff58bdf2cd 100644
> > --- a/arch/arm64/boot/dts/rockchip/Makefile
> > +++ b/arch/arm64/boot/dts/rockchip/Makefile
> > @@ -114,6 +114,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5.dtb
> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-display-vz.dtbo
> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-io-expander.dtbo
> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-armsom-sige7.dtb
> > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-cm3588-nas.dtb
> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-coolpi-cm5-evb.dtb
> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb
> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-wifi.dtbo
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3588-cm3588-nas.dts b/arch/arm64/boot/dts/rockchip/rk3588-cm3588-nas.dts
> > new file mode 100644
> > index 000000000000..6c45b376d001
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/rockchip/rk3588-cm3588-nas.dts
> > @@ -0,0 +1,1269 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > + * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
> > + * Copyright (c) 2023 FriendlyElec Computer Tech. Co., Ltd.
> > + * Copyright (c) 2023 Thomas McKahan
> > + * Copyright (c) 2024 Sebastian Kropatsch
> > + *
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/input/input.h>
> > +#include <dt-bindings/pinctrl/rockchip.h>
> > +#include <dt-bindings/soc/rockchip,vop2.h>
> > +#include <dt-bindings/usb/pd.h>
> > +#include "rk3588.dtsi"
> > +
> > +/ {
> > +	model = "FriendlyElec CM3588 NAS";
> > +	compatible = "friendlyarm,cm3588-nas", "rockchip,rk3588";
> 
> Maybe this should be something like:
> 
>   "friendlyarm,cm3588-nas", "friendlyarm,cm3588", "rockchip,rk3588";

This also needs an update of the binding document. Please use a similar
notion as the other som + baseboard entries
(const for the som + enum with one entry with the baseboard)

[...]


> > +/* Connected to 5V Fan */
> > +&pwm1 {
> > +	pinctrl-0 = <&pwm1m1_pins>;
> 
> pinctrl-names is missing, should typically always be defined together
> with pinctrl-X props, same for multiple nodes.

A rationale being that you don't want the soc dtsi in a later stage adding
a possible pinctrl-1 with the board only overriding the pinctrl-0.
When you set the pinctrl-names as well, you get independent from that.


Thanks
Heiko






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux