Re: [PATCH V2 RESEND 2/4] dt-bindings: Add root properties for Raspberry Pi

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Thu, 29 Jan 2015, Stefan Wahren wrote:

> This patch adds root compatible properties for the following boards:
> - Raspberry Pi Model A
> - Raspberry Pi Model A+
> - Raspberry Pi Model B
> - Raspberry Pi Model B (no P5)
> - Raspberry Pi Model B rev2
> - Raspberry Pi Model B+
> - Raspberry Pi Compute Module
> 
> Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxx>
> ---
>  Documentation/devicetree/bindings/arm/bcm2835.txt |   31 +++++++++++++++++++--
>  1 file changed, 29 insertions(+), 2 deletions(-)

Applied, with Rob's Ack.

> diff --git a/Documentation/devicetree/bindings/arm/bcm2835.txt b/Documentation/devicetree/bindings/arm/bcm2835.txt
> index ac68348..c78576b 100644
> --- a/Documentation/devicetree/bindings/arm/bcm2835.txt
> +++ b/Documentation/devicetree/bindings/arm/bcm2835.txt
> @@ -1,8 +1,35 @@
>  Broadcom BCM2835 device tree bindings
>  -------------------------------------------
>  
> -Boards with the BCM2835 SoC shall have the following properties:
> +Raspberry Pi Model A
> +Required root node properties:
> +compatible = "raspberrypi,model-a", "brcm,bcm2835";
>  
> -Required root node property:
> +Raspberry Pi Model A+
> +Required root node properties:
> +compatible = "raspberrypi,model-a-plus", "brcm,bcm2835";
>  
> +Raspberry Pi Model B
> +Required root node properties:
> +compatible = "raspberrypi,model-b", "brcm,bcm2835";
> +
> +Raspberry Pi Model B (no P5)
> +early model B with I2C0 rather than I2C1 routed to the expansion header
> +Required root node properties:
> +compatible = "raspberrypi,model-b-i2c0", "brcm,bcm2835";
> +
> +Raspberry Pi Model B rev2
> +Required root node properties:
> +compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835";
> +
> +Raspberry Pi Model B+
> +Required root node properties:
> +compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
> +
> +Raspberry Pi Compute Module
> +Required root node properties:
> +compatible = "raspberrypi,compute-module", "brcm,bcm2835";
> +
> +Generic BCM2835 board
> +Required root node properties:
>  compatible = "brcm,bcm2835";
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux