[PATCH v1 0/2] iio: adc: ti-ads1119: Add driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>

The ADS1119 is a precision, 16-bit, analog-to-digital converter (ADC)
that features two differential or four single-ended inputs through a
flexible input multiplexer (MUX), rail-to-rail input
buffers, a programmable gain stage, a voltage reference, and an
oscillator.

Apart from normal single conversion, the driver also supports
continuous conversion mode using a triggered buffer. However, in this
mode only one channel can be scanned at a time, and it only uses the data
ready interrupt as a trigger. This is because the device channels are
multiplexed, and using its own data ready interrupt as a trigger guarantees
the signal sampling frequency.

João Paulo Gonçalves (2):
  dt-bindings: iio: adc: add ti,ads1119
  iio: adc: ti-ads1119: Add driver

 .../bindings/iio/adc/ti,ads1119.yaml          | 122 +++
 MAINTAINERS                                   |   8 +
 drivers/iio/adc/Kconfig                       |  13 +
 drivers/iio/adc/Makefile                      |   1 +
 drivers/iio/adc/ti-ads1119.c                  | 815 ++++++++++++++++++
 5 files changed, 959 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,ads1119.yaml
 create mode 100644 drivers/iio/adc/ti-ads1119.c

-- 
2.39.2





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux