[PATCH 09/10] arm64: dts: qcom: sc8180x-primus: Enable the two MP USB ports

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>

The SC8180X Primus comes with an AUX card with two USB ports, fed by the
two multiport ports.

Enable the involved nodes and define two always-on regulators to enable
VBUS for these ports.

Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc8180x-primus.dts | 60 +++++++++++++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
index bfee60c93ccc..f7632f13ac43 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
+++ b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
@@ -223,6 +223,32 @@ vreg_s4a_1p8: pm8150-s4 {
 		vin-supply = <&vph_pwr>;
 	};
 
+	vreg_usb2_host_en: regulator-usb2-host-en {
+		compatible = "regulator-fixed";
+		regulator-name = "usb2_host_en";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&pmc8180_1_gpios 9 0>;
+		enable-active-high;
+
+		regulator-always-on;
+	};
+
+	vreg_usb3_host_en: regulator-usb3-host-en {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3_host_en";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&pmc8180_2_gpios 9 0>;
+		enable-active-high;
+
+		regulator-always-on;
+	};
+
 	usbprim-sbu-mux {
 		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
 
@@ -623,6 +649,40 @@ &ufs_mem_phy {
 	status = "okay";
 };
 
+&usb_mp {
+	status = "okay";
+};
+
+&usb_mp0_hsphy {
+	vdda-pll-supply = <&vreg_l5e_0p88>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+	vdda33-supply = <&vreg_l16e_3p0>;
+
+	status = "okay";
+};
+
+&usb_mp0_qmpphy {
+	vdda-phy-supply = <&vreg_l3c_1p2>;
+	vdda-pll-supply = <&vreg_l5e_0p88>;
+
+	status = "okay";
+};
+
+&usb_mp1_hsphy {
+	vdda-pll-supply = <&vreg_l5e_0p88>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+	vdda33-supply = <&vreg_l16e_3p0>;
+
+	status = "okay";
+};
+
+&usb_mp1_qmpphy {
+	vdda-phy-supply = <&vreg_l3c_1p2>;
+	vdda-pll-supply = <&vreg_l5e_0p88>;
+
+	status = "okay";
+};
+
 &usb_prim_hsphy {
 	vdda-pll-supply = <&vreg_l5e_0p88>;
 	vdda18-supply = <&vreg_l12a_1p8>;

-- 
2.43.0





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux