i.MX95 System Manager Firmware source: https://github.com/nxp-imx/imx-sm To generate html from the repo: make html i.MX95 System Manager Firmware support vendor extension protocol: - Battery Backed Module(BBM) Protocol This protocol is intended provide access to the battery-backed module. This contains persistent storage (GPR), an RTC, and the ON/OFF button. The protocol can also provide access to similar functions implemented via external board components. The BBM protocol provides functions to: - Describe the protocol version. - Discover implementation attributes. - Read/write GPR - Discover the RTCs available in the system. - Read/write the RTC time in seconds and ticks - Set an alarm (per LM) in seconds - Get notifications on RTC update, alarm, or rollover. - Get notification on ON/OFF button activity. - MISC Protocol for misc settings This includes controls that are misc settings/actions that must be exposed from the SM to agents. They are device specific and are usually define to access bit fields in various mix block control modules, IOMUX_GPR, and other GPR/CSR owned by the SM. This protocol supports the following functions: - Describe the protocol version. - Discover implementation attributes. - Set/Get a control. - Initiate an action on a control. - Obtain platform (i.e. SM) build information. - Obtain ROM passover data. - Read boot/shutdown/reset information for the LM or the system. This patchset is to support the two protocols and users that use the protocols. The upper protocol infomation is also included in patch 1 Signed-off-by: Peng Fan <peng.fan@xxxxxxx> To: Jonathan Corbet <corbet@xxxxxxx> To: Shawn Guo <shawnguo@xxxxxxxxxx> To: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> To: Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx> To: Fabio Estevam <festevam@xxxxxxxxx> To: Rob Herring <robh@xxxxxxxxxx> To: Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx> To: Conor Dooley <conor+dt@xxxxxxxxxx> To: Sudeep Holla <sudeep.holla@xxxxxxx> To: Cristian Marussi <cristian.marussi@xxxxxxx> To: Peng Fan <peng.fan@xxxxxxx> Cc: linux-doc@xxxxxxxxxxxxxxx Cc: linux-kernel@xxxxxxxxxxxxxxx Cc: imx@xxxxxxxxxxxxxxx Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx Cc: devicetree@xxxxxxxxxxxxxxx Changes in v4: - Rebased to next-20240520 - Added vendor/sub-vendor, currently the sub-vendor is "i.MX95 EVK", this may not be proper, I will check with firmware owner on this to seen any update. please still help review other parts of the patchset. - Added constrain value in binding doc, change the property name from nxp,wakeup-sources to nxp,ctrl-ids to match firmware definition. - Put i.MX code under new directory imx/ - Change the misc event from three to one, the code in previous patchset was wrong. - Link to v3: https://lore.kernel.org/r/20240412-imx95-bbm-misc-v2-v3-0-4380a4070980@xxxxxxx Changes in v3: - Update cover letter and patch commit log to include more information. - Add documentation for BBM and MISC protocols under Documentation/firmware-guide/nxp. Not sure if this is a good place. - Fix the bindings, hope I have addressed the issues. Drop imx,scmi.yaml. Add nxp,imx95-scmi.yaml for NXP vendor protocol properties. Add constraints, add nxp prefix for NXP vendor properties. Use anyOf in arm,scmi.yaml to ref vendor yaml. - Use cpu_to_le32 per Cristian - Link to v2: https://lore.kernel.org/r/20240405-imx95-bbm-misc-v2-v2-0-9fc9186856c2@xxxxxxx Changes in v2: - Sorry for late update since v1. - Add a new patch 1 - Address imx,scmi.yaml issues - Address comments for imx-sm-bbm.c and imx-sm-misc.c - I not add vendor id since related patches not landed in linux-next. - Link to v1: https://lore.kernel.org/r/20240202-imx95-bbm-misc-v1-0-3cb743020933@xxxxxxx --- Peng Fan (6): Documentation: firmware-guide: add NXP i.MX95 SCMI documentation dt-bindings: firmware: add i.MX95 SCMI Extension protocol firmware: arm_scmi: add initial support for i.MX BBM protocol firmware: arm_scmi: add initial support for i.MX MISC protocol firmware: imx: support i.MX95 BBM module firmware: imx: add i.MX95 MISC driver .../devicetree/bindings/firmware/arm,scmi.yaml | 5 +- .../bindings/firmware/nxp,imx95-scmi.yaml | 43 + Documentation/firmware-guide/index.rst | 10 + Documentation/firmware-guide/nxp/imx95-scmi.rst | 877 +++++++++++++++++++++ Documentation/firmware-guide/nxp/index.rst | 10 + drivers/firmware/arm_scmi/Kconfig | 2 + drivers/firmware/arm_scmi/Makefile | 1 + drivers/firmware/arm_scmi/imx/Kconfig | 23 + drivers/firmware/arm_scmi/imx/Makefile | 3 + drivers/firmware/arm_scmi/imx/imx-sm-bbm.c | 380 +++++++++ drivers/firmware/arm_scmi/imx/imx-sm-misc.c | 303 +++++++ drivers/firmware/imx/Makefile | 2 + drivers/firmware/imx/sm-bbm.c | 314 ++++++++ drivers/firmware/imx/sm-misc.c | 108 +++ include/linux/firmware/imx/sm.h | 33 + include/linux/scmi_imx_protocol.h | 64 ++ 16 files changed, 2177 insertions(+), 1 deletion(-) --- base-commit: 81ec2bad50c0c1bd3c66389fda32a6f2cf922508 change-id: 20240405-imx95-bbm-misc-v2-b5e9d24adc42 Best regards, -- Peng Fan <peng.fan@xxxxxxx>
