From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx> The enable gpio is not required when the SBU mux is used only for orientation, make enable-gpios required only for alternate mode switch use case. Signed-off-by: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx> --- Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml index 88e1607cf053..30edcce82f97 100644 --- a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml +++ b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml @@ -44,13 +44,18 @@ properties: required: - compatible - - enable-gpios - select-gpios - orientation-switch - port allOf: - $ref: usb-switch.yaml# + - if: + required: + - mode-switch + then: + required: + - enable-gpios additionalProperties: false -- 2.39.2
