All IPQ806x based boards will include this file and will need a way to
identify each GSBI device. So this change is labelling them all to make
reference from board specific file easier.
Signed-off-by: Mathieu Olivari <mathieu@xxxxxxxxxxxxxx>
---
arch/arm/boot/dts/qcom-ipq8064.dtsi | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index d01f618..ffa5b5e 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -140,7 +140,7 @@
ranges;
status = "disabled";
- serial@12490000 {
+ uart2: serial@12490000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x12490000 0x1000>,
<0x12480000 0x1000>;
@@ -150,7 +150,7 @@
status = "disabled";
};
- i2c@124a0000 {
+ i2c2: i2c@124a0000 {
compatible = "qcom,i2c-qup-v1.1.1";
reg = <0x124a0000 0x1000>;
interrupts = <0 196 0>;
@@ -175,7 +175,7 @@
ranges;
status = "disabled";
- serial@16340000 {
+ uart4: serial@16340000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16340000 0x1000>,
<0x16300000 0x1000>;
@@ -185,7 +185,7 @@
status = "disabled";
};
- i2c@16380000 {
+ i2c4: i2c@16380000 {
compatible = "qcom,i2c-qup-v1.1.1";
reg = <0x16380000 0x1000>;
interrupts = <0 153 0>;
@@ -209,7 +209,7 @@
ranges;
status = "disabled";
- serial@1a240000 {
+ uart5: serial@1a240000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x1a240000 0x1000>,
<0x1a200000 0x1000>;
@@ -219,7 +219,7 @@
status = "disabled";
};
- i2c@1a280000 {
+ i2c5: i2c@1a280000 {
compatible = "qcom,i2c-qup-v1.1.1";
reg = <0x1a280000 0x1000>;
interrupts = <0 155 0>;
@@ -232,7 +232,7 @@
#size-cells = <0>;
};
- spi@1a280000 {
+ spi5: spi@1a280000 {
compatible = "qcom,spi-qup-v1.1.1";
reg = <0x1a280000 0x1000>;
interrupts = <0 155 0>;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
