Add documentation for ltc2664. Co-developed-by: Michael Hennerich <michael.hennerich@xxxxxxxxxx> Signed-off-by: Michael Hennerich <michael.hennerich@xxxxxxxxxx> Signed-off-by: Kim Seer Paller <kimseer.paller@xxxxxxxxxx> --- .../bindings/iio/dac/adi,ltc2664.yaml | 167 ++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 168 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml new file mode 100644 index 000000000000..517a96808ee0 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml @@ -0,0 +1,167 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/dac/adi,ltc2664.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices LTC2664 DAC + +maintainers: + - Michael Hennerich <michael.hennerich@xxxxxxxxxx> + - Kim Seer Paller <kimseer.paller@xxxxxxxxxx> + +description: | + Analog Devices LTC2664 4 channel, 16 bit, +-10V DAC + https://www.analog.com/media/en/technical-documentation/data-sheets/2664fa.pdf + +properties: + compatible: + enum: + - adi,ltc2664 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 50000000 + + vcc-supply: + description: Analog Supply Voltage Input. + + v-pos-supply: + description: Positive Supply Voltage Input. + + v-neg-supply: + description: Negative Supply Voltage Input. + + iovcc-supply: + description: Digital Input/Output Supply Voltage. + + ref-supply: + description: + Reference Input/Output. The voltage at the REF pin sets the full-scale + range of all channels. If not provided the internal reference is used and + also provided on the VREF pin. + + clr-gpios: + description: + Active-low Asynchronous Clear Input. A logic low at this level-triggered + input clears the part to the reset code and range determined by the + hardwired option chosen using the MSPAN pins. The control registers are + cleared to zero. + maxItems: 1 + + adi,manual-span-operation-config: + description: + This property must mimic the MSPAN pin configurations. By tying the MSPAN + pins (MSP2, MSP1 and MSP0) to GND and/or VCC, any output range can be + hardware-configured with different mid-scale or zero-scale reset options. + The hardware configuration is latched during power on reset for proper + operation. + 0 - MPS2=GND, MPS1=GND, MSP0=GND + 1 - MPS2=GND, MPS1=GND, MSP0=VCC + 2 - MPS2=GND, MPS1=VCC, MSP0=GND + 3 - MPS2=GND, MPS1=VCC, MSP0=VCC + 4 - MPS2=VCC, MPS1=GND, MSP0=GND + 5 - MPS2=VCC, MPS1=GND, MSP0=VCC + 6 - MPS2=VCC, MPS1=VCC, MSP0=GND + 7 - MPS2=VCC, MPS1=VCC, MSP0=VCC (enables SoftSpan feature) + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6, 7] + default: 7 + + io-channels: + description: + Analog multiplexer output. VOUT0-VOUT3, MUXIN0-MUXIN3, REFLO, REF, V+, V-, + and a temperature monitor output can be internally routed to the MUXOUT pin. + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "^channel@[0-3]$": + type: object + additionalProperties: false + + properties: + reg: + description: The channel number representing the DAC output channel. + maximum: 3 + + adi,toggle-mode: + description: + Set the channel as a toggle enabled channel. Toggle operation enables + fast switching of a DAC output between two different DAC codes without + any SPI transaction. + type: boolean + + adi,output-range-microvolt: + description: Specify the channel output full scale range. + oneOf: + - items: + - const: 0 + - enum: [5000000, 10000000] + - items: + - const: -5000000 + - const: 5000000 + - items: + - const: -10000000 + - const: 10000000 + - items: + - const: -2500000 + - const: 2500000 + + required: + - reg + - adi,output-range-microvolt + +required: + - compatible + - reg + - spi-max-frequency + - vcc-supply + - iovcc-supply + - v-pos-supply + - v-neg-supply + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + dac@0 { + compatible = "adi,ltc2664"; + reg = <0>; + spi-max-frequency = <10000000>; + + vcc-supply = <&vcc>; + iovcc-supply = <&vcc>; + ref-supply = <&vref>; + v-pos-supply = <&vpos>; + v-neg-supply = <&vneg>; + + io-channels = <&adc 0>; + + #address-cells = <1>; + #size-cells = <0>; + channel@0 { + reg = <0>; + adi,toggle-mode; + adi,output-range-microvolt = <(-10000000) 10000000>; + }; + + channel@1 { + reg = <1>; + adi,output-range-microvolt = <0 10000000>; + }; + }; + }; +... diff --git a/MAINTAINERS b/MAINTAINERS index b3be54c09159..7becbdf7d1df 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12857,6 +12857,7 @@ L: linux-iio@xxxxxxxxxxxxxxx S: Supported W: https://ez.analog.com/linux-software-drivers F: Documentation/ABI/testing/sysfs-bus-iio-dac +F: Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml LTC2688 IIO DAC DRIVER M: Nuno Sá <nuno.sa@xxxxxxxxxx> -- 2.34.1
