Add documentation for the Hynitron CST816X touchscreen bindings. Signed-off-by: Oleh Kuzhylnyi <kuzhylol@xxxxxxxxx> --- Changes in v2: - Apply pin definitions and DT headers - Use generic name for DT node - Drop status field .../input/touchscreen/hynitron,cst816x.yaml | 56 +++++++++++++++++++ 1 file changed, 56 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/hynitron,cst816x.yaml diff --git a/Documentation/devicetree/bindings/input/touchscreen/hynitron,cst816x.yaml b/Documentation/devicetree/bindings/input/touchscreen/hynitron,cst816x.yaml new file mode 100644 index 000000000000..22bd145db5ee --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/hynitron,cst816x.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/hynitron,cst816x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hynitron CST816X series touchscreen controller + +description: | + Bindings for Hynitron CST816X series touchscreen controllers. + +maintainers: + - Oleh Kuzhylnyi <kuzhylol@xxxxxxxxx> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + enum: + - hynitron,cst816s + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - reset-gpios + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + touchscreen@15 { + compatible = "hynitron,cst816s"; + reg = <0x15>; + interrupt-parent = <&gpio>; + interrupts = <4 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; + }; + }; + +... -- 2.30.2