RE: [PATCH v2 1/2] ASoC: dt-bindings: Add PDM controller for the StarFive JH8100 SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 23/04/2024 10:34, Krzysztof Kozlowski wrote:
> 
> On 23/04/2024 10:34, Xingyu Wu wrote:
> > Add bindings about the PDM controller for the StarFive JH8100 SoC.
> >
> > Signed-off-by: Xingyu Wu <xingyu.wu@xxxxxxxxxxxxxxxx>
> 
> If there is going to be resend/new version, three nits. Anyway:
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> 

I will fix it in next version. Thanks.

> ...
> 
> > +
> > +title: StarFive JH8100 PDM controller
> > +
> > +description: |
> 
> Do not need '|' unless you need to preserve formatting.

Will drop.

> 
> > +  The Pulse Density Modulation (PDM) controller is a digital PDM out
> > + microphone interface controller and decoder that supports both up to
> > + 4  channels, and an Inter-IC Sound (I2S) transmitter that outputs
> > + standard  stereo audio data to another device. The I2S transmitter
> > + can be  configured to operate either a master or a slave (default
> > + mode). The PDM  controller includes two PDM blocks, each PDM block
> > + can drive one  bitstream sampling clock and two bitstream coming
> > + data (mono/stereo)  with sampling clock rising and falling edge.
> > +
> > +maintainers:
> > +  - Xingyu Wu <xingyu.wu@xxxxxxxxxxxxxxxx>
> > +  - Walker Chen <walker.chen@xxxxxxxxxxxxxxxx>
> > +
> > +allOf:
> > +  - $ref: dai-common.yaml#
> > +
> > +properties:
> > +  compatible:
> > +    const: starfive,jh8100-pdm
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    items:
> > +      - description: DMIC output clock
> > +      - description: Main ICG clock
> > +
> > +  clock-names:
> > +    items:
> > +      - const: dmic
> > +      - const: icg
> > +
> > +  resets:
> > +    maxItems: 1
> > +
> > +  "#sound-dai-cells":
> > +    const: 0
> > +
> > +  starfive,syscon:
> > +    $ref: /schemas/types.yaml#/definitions/phandle-array
> > +    items:
> > +      - items:
> > +          - description: phandle to System Register Controller sys_syscon_ne node.
> > +          - description: PDM source enabled control offset of SYS_SYSCON_NE
> register.
> > +          - description: PDM source enabled control mask
> > +    description:
> > +      The phandle to System Register Controller syscon node and the PDM
> source
> > +      from I2S enabled control offset and mask of SYS_SYSCON_NE register.
> 
> This description duplicates items. Drop redundant parts (there is really never a
> need to say phandle is a phandle because it cannot be anything else). Instead say
> what is it used for.

Will fix.

> 
> 
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - clocks
> > +  - clock-names
> > +  - resets
> > +  - '#sound-dai-cells'
> 
> Use consistent quotes, either ' or "
> 

Will fix.

Best regards,
Xingyu Wu




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux