Radxa ROCK Pi S have optional onboard SD NAND on board revision v1.1, v1.2 and v1.3, revision v1.5 changed to use optional onboard eMMC. The optional SD NAND typically fails to initialize: mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) mmc0: error -110 whilst initialising SD card mmc_host mmc0: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0) mmc0: error -110 whilst initialising SD card mmc_host mmc0: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0) mmc0: error -110 whilst initialising SD card mmc_host mmc0: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0) mmc0: error -110 whilst initialising SD card Add pinctrl and cap-sd-highspeed to fix SD NAND initialization. Also drop bus-width and mmc-hs200-1_8v to fix eMMC initialization on the new v1.5 board revision, only 3v3 signal voltage is used. Fixes: 2e04c25b1320 ("arm64: dts: rockchip: add ROCK Pi S DTS support") Signed-off-by: Jonas Karlman <jonas@xxxxxxxxx> --- Hardware revision changes can be found at: - https://wiki.radxa.com/RockpiS/hardware/revisions - https://docs.radxa.com/en/rockpi/rockpis/hardware/hardware-revision --- arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts index b47fe02c33fb..84f4b4a44644 100644 --- a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts +++ b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts @@ -126,10 +126,12 @@ &cpu0 { }; &emmc { - bus-width = <4>; cap-mmc-highspeed; - mmc-hs200-1_8v; + cap-sd-highspeed; + no-sdio; non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>; vmmc-supply = <&vcc_io>; status = "okay"; }; -- 2.43.2