Le 2024-04-19 14:38, Kamel Bouhara a écrit :
Add a new driver for the TouchNetix's axiom family of touchscreen
controller. This driver only support i2c and can be later adapted for
SPI and USB support.
Hello Dmitry,
I just saw you are still applying patch and I wanted to know if this
series could be merged as well ?
Kamel
--
Changes in v11:
- Fix regulators name to match dt-binding
- Enable regulators before reset is asserted
Changes in v10:
- Set regulators as required
- Enable power supply before reset
- Fix ref count due to regulator requested twice
- Rebase on v6.9-rc4
Changes in v9:
- Fix issue reported in
https://lore.kernel.org/oe-kbuild-all/202402201157.BKo97uWl-lkp@xxxxxxxxx/
- Rebase on v6.8-rc2
Changes in v8:
- Fix missing call to input_report_slot_state()
- Fix issue reported in
https://lore.kernel.org/oe-kbuild-all/202402020623.8T1Ah513-lkp@xxxxxxxxx/
Changes in v7:
- Remove startup time from dt-binding
- Fix usage table not correctly populated
Changes in v6:
- Fix missing unevaluatedProperties.in dt-binding
- Use __le16 to correctly deal with device endianness
- Use standart kernel types s/char/u8/
- Use regmap api as driver might support spi later
- Use get_unaligned_le16() for the sake of clarity
- Use devm_regulator_enable_optional()
Changes in v5:
- Fix wrong message constructed in axiom_i2c_read
- Delay required between i2c reads is >= 250us
- Do not split report reading in two phases as we'll
have to wait 500us
- Use lower-case in properties names
- Make regulators properties are required in dt-binding
- Fix bug report:
https://lore.kernel.org/lkml/202312051457.y3N1q3sZ-lkp@xxxxxxxxx/
- Fix bug report:
https://lore.kernel.org/lkml/6f8e3b64-5b21-4a50-8680-063ef7a93bdb@suswa.mountain/
Changes in v4:
- Cleanup unused headers and macros
- Use standard kernel type
- Namespace structures and functions
- Use packed struct when possible to avoid bitfield operators
- Fix missing break when address is found in
axiom_populate_target_address()
- Split reads in two steps for the reports, first length then report
itself so we only read required bytes
- Get poll-interval from devicetree
- Add VDDI/VDDA regulators
- Add a startup delay of 110 ms required after VDDA/VDDI is applied
- Remove axiom_i2c_write() as it is no more used
Changes in v3:
- Remove irq-gpios property in dt-binding
- Use a generic node name
- Fix issues reported in
https://lore.kernel.org/oe-kbuild-all/202310100300.oAC2M62R-lkp@xxxxxxxxx/
Changes in v2:
- Add device tree binding documentation
- Move core functions in axiom_i2c as we only care about i2c support
now
- Use static function when required
- Use syntax dev_err_probe()
- Add an hardware based reset
Kamel Bouhara (3):
dt-bindings: vendor-prefixes: Add TouchNetix AS
dt-bindings: input: Add TouchNetix axiom touchscreen
Input: Add TouchNetix axiom i2c touchscreen driver
.../input/touchscreen/touchnetix,ax54a.yaml | 62 ++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
MAINTAINERS | 8 +
drivers/input/touchscreen/Kconfig | 12 +
drivers/input/touchscreen/Makefile | 1 +
drivers/input/touchscreen/touchnetix_axiom.c | 657 ++++++++++++++++++
6 files changed, 742 insertions(+)
create mode 100644
Documentation/devicetree/bindings/input/touchscreen/touchnetix,ax54a.yaml
create mode 100644 drivers/input/touchscreen/touchnetix_axiom.c
--
2.25.1
--
--
Kamel Bouhara, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
