As the drivers default to loading the firmware from the board-specific
location, drop the firmware-name properties.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
index e8148b3d6c50..2c8a77401aa3 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
@@ -161,7 +161,6 @@ bluetooth {
&adsp_pil {
status = "okay";
- firmware-name = "qcom/apq8096/adsp.mbn";
};
&blsp2_i2c1 {
@@ -253,7 +252,6 @@ &mmcc {
&mss_pil {
status = "okay";
pll-supply = <&vreg_l12a_1p8>;
- firmware-name = "qcom/apq8096/mba.mbn", "qcom/apq8096/modem.mbn";
};
&pm8994_resin {
--
2.39.2
